DDT
Platinum Member
- Joined
- Dec 18, 2000
- Messages
- 953
- Location
- Clay Center, Kansas
- Tractor
- Kubota M6040/cab, BX25D, RTVX900
New trailer- Show & tell
- Thread starter DDT
- Start date
- Views: 4268
Diamondpilot
Super Star Member
- Joined
- Jan 18, 2007
- Messages
- 16,316
- Location
- Daleville, IN
- Tractor
- Jinma 254/284 Ford 861 Powermaster at work
Nice looking trailer. Is it sitting down a little on the pin? Most GN trailers I have been around have a adjustment.
Chris
Chris
jayste
Veteran Member
- Joined
- Feb 12, 2008
- Messages
- 1,671
- Tractor
- 2004 Kubota M4800 SU
Very nice indeed!:thumbsup:
tractorski
Silver Member
How much does it weigh? how much does it cost? I want one BAD!
OP
DDT
Platinum Member
- Joined
- Dec 18, 2000
- Messages
- 953
- Location
- Clay Center, Kansas
- Tractor
- Kubota M6040/cab, BX25D, RTVX900
It does have adjustment but its about right, on level ground the trailer is very close to level.
According to the title empty wiehgt 5840 lbs with a 15,680 lbs GVWR. Oh I also got a rear recever hitch with it to, I had to weld one on the last trailer. 6100.00 I found a good but I think.
I can flip the ramps over with one hand (both ways) My back will not miss lugging those 90 lbs ramps around.
I will keep all my chains/ bommers and straps in the trailer tool box and get a lot more room in the truck tool box for other needed stuff.
According to the title empty wiehgt 5840 lbs with a 15,680 lbs GVWR. Oh I also got a rear recever hitch with it to, I had to weld one on the last trailer. 6100.00 I found a good but I think.
I can flip the ramps over with one hand (both ways) My back will not miss lugging those 90 lbs ramps around.
I will keep all my chains/ bommers and straps in the trailer tool box and get a lot more room in the truck tool box for other needed stuff.
tractorboy5500
Gold Member
Thats what i been looking at, the PJ's, the one i want is the 27+5, with duall tandum's, and the place here in houston gave me a price of 7300, thats with a spare, and without the pop up like you got. Not sure if i would use the pop up much.
Runner
Elite Member
- Joined
- May 12, 2007
- Messages
- 3,027
- Location
- Missouri
- Tractor
- 2024 Cub Cadet Ultima ZTXS5 54, 2007 John Deere 2520, 1989 John Deere 185, 1960 Panzer T70B
DDT,
That is a great looking rig, congratulations!
I have a stupid question: I saw the receiver option on the PJ web site but can't figure out what it is used for.
Could you enlighten me?
That is a great looking rig, congratulations!
I have a stupid question: I saw the receiver option on the PJ web site but can't figure out what it is used for.
Could you enlighten me?
Diamondpilot
Super Star Member
- Joined
- Jan 18, 2007
- Messages
- 16,316
- Location
- Daleville, IN
- Tractor
- Jinma 254/284 Ford 861 Powermaster at work
To tandem pull. I have pulled a Jetski many of times behind my boat and my neighbor 2 doors down pulls his 38'th wheel and a 21' ski boat in tandem all the time behind a Dodge Cummins.
Chris
whistlepig
Elite Member
Nice trailer. I have a PJ 16' tandem bumper pull. They are very well made trailers.
