Taiser
Gold Member
- Joined
- Feb 7, 2005
- Messages
- 466
- Location
- Northwestern Ontario, Canada
- Tractor
- Kubota B7800 with Loader and Backhoe, Cub Cadet 2160
Hey guys...
Buddy of mine just bought a used Massey 1260, has about 900 hours. After using it for a bit, the 4wd will disengage at the front axle. It won't re-engage until the machine cools off, then it will go back into 4WD and kick out again after a few minutes. We're getting ready to tear into it this week-end and see what's up.
I'm just wondering if anyone could pin-point a possible problem to specifically look for while we are in there that would cause this, or if anyone has had any similar problems? If anyone could post a schematic that would be great as well! Thanks in advance guys.
Buddy of mine just bought a used Massey 1260, has about 900 hours. After using it for a bit, the 4wd will disengage at the front axle. It won't re-engage until the machine cools off, then it will go back into 4WD and kick out again after a few minutes. We're getting ready to tear into it this week-end and see what's up.
I'm just wondering if anyone could pin-point a possible problem to specifically look for while we are in there that would cause this, or if anyone has had any similar problems? If anyone could post a schematic that would be great as well! Thanks in advance guys.
