Need some brain power better than mine
- Thread starter jjmarotz
- Start date
- Views: 3846
dcyrilc
Super Member
you never said this wasn't an open book exam
Must be one of those East Coast things, you guys have all the book smarts...
Here in the West, we have to rely on the gray matter between our ears.:laughing:
PS: I must be cleaning my ears too much as the gray matter seems to be getting depleated.
OP
jjmarotz
Gold Member
Had to LMAO at that ^^^^
Thanks for the help fellas!!! Didn't expect this fast of response.
dcyrilc
Super Member
No problem. Seems you caught us on a good night.:laughing:
Keep us posted on how the project comes out. (Lots o' pix):thumbsup:
mjncad
Super Member
The circumference of your 9" disk is 28.27" (~28-17/64") and divided by 5 works out to 5.65" (~5-21/32").
Now spend a couple of bucks on a dressmaker's tape and wrap it around your disk and measure off your distances. The tapes stretch, so don't try and make them too tight. They're not super accurate; but I find them useful for measuring curved objects.
Now spend a couple of bucks on a dressmaker's tape and wrap it around your disk and measure off your distances. The tapes stretch, so don't try and make them too tight. They're not super accurate; but I find them useful for measuring curved objects.
jmarotz
Member
Didn't someone get you a Pocket Reference book for a gift?
Now use it!
Now use it!
OP
jjmarotz
Gold Member
wldrbob
Bronze Member
- Joined
- Feb 24, 2008
- Messages
- 80
- Location
- swan river manitoba canada
- Tractor
- white 2/60 case 830 w4 international cletrac cat
why didnt you cut 5 little pieces of angle and just place them around your plate to find your spacings?even by eying them it shouldent take long to set that up.
