New Member-TROY BILT TILLER MECHANIC

[ajp0007]

Hello, several years ago I became a troy bilt tiller owner. I owned 4 so far. I have 2 horse tillers, 1 econo horse and one pony tiller. I use them all and they have 6hp tecumseh engines. If I could assist anyone let me know by dropping an email to me.
You could also join the troy bilt tiller forum on yahoo.com

 

[magicheater]

There have been many questions about troybilt tillers on here. I am sure your input will be welcomed! TBN is a very friendly site with a broad range of experience from its members. I am fairly new, have stubbed my toe once or twice but enjoy the lively discussions on almost any subject.

 

[Flatheadyoungin]

welcome

i used to work at a dealership that sold them........i've got a sweet place in my heart for the ones before mtd took over.....

i've had serveral smaller ones that people couldn't get going, i go them running then sold them...

recently, i inherited my wife's grandpa's horse....it's rough looking and i need a few things for it.......one day i think i'll pain it up and replace everything that is needed, seals, etc......right now it's probably on the 10 year project list.....

Hello, several years ago I became a troy bilt tiller owner. I owned 4 so far. I have 2 horse tillers, 1 econo horse and one pony tiller. I use them all and they have 6hp tecumseh engines. If I could assist anyone let me know by dropping an email to me.
You could also join the troy bilt tiller forum on yahoo.com

 

[ivan769]

I just bought an Econo Horse tiller that hadnt been used much and cannot find the model or serial number on it. I want to download the manual but need the numbers.
The tiller has a tecumsch engine and i do not know where to find the seriaal number for it. I just put in a carb rebuild kitand found the lever on the back of the engine that controls the carb seems to be stuck.
Any help will surely be appreciated.

 

[yooper1]

Hello Ivan769 and welcome to TBN

you may not get any answers down here in the member introduction area by being on the end of another persons intro.

Try posting your question in the rototillers forum here:

Rototillers - TractorByNet.com

Feel free to ask any questions. Most members are friendly around here