Pushed my luck, finally caught up with me...

   / Pushed my luck, finally caught up with me... #11  
I've been looking for something like this pro tek stuff. Do they make it for M Series Kubota's, I checked out their website and sadly could only find bx stuff?
Any advice on M Series under protection would be sweet, I've busted a few radiators with debris, not to mention a lot of other stuff.

I haven't found a need for this on the M personally and mowed 10'-12' saplings and brush.
 
   / Pushed my luck, finally caught up with me... #12  
I've been looking for something like this pro tek stuff. Do they make it for M Series Kubota's, I checked out their website and sadly could only find bx stuff?
Any advice on M Series under protection would be sweet, I've busted a few radiators with debris, not to mention a lot of other stuff.

BroTek specializes in add-on hardware for the SCUT/CUT market. I'm surprised that you've had more than one radiator issue - the M series are usually fairly bullet-proof. If I were in your shoes, I'd rig up a piece of expanded metal under your engine if you need extra protection
Mike
 
   / Pushed my luck, finally caught up with me... #13  
I wonder if my CVT has that? Have to look I guess.
 
   / Pushed my luck, finally caught up with me... #14  
I goggles brotek and didnt come up with anything. Wanted to check into this as I have a BX25 as well and don't want to be "unprotected"
 
   / Pushed my luck, finally caught up with me... #15  
   / Pushed my luck, finally caught up with me... #16  
Here is the Kubota Service Bulletin for replacing the HST fan.

Deano
 

Attachments

  • PSB-2007-050 HST FAN.pdf
    515.9 KB · Views: 183
   / Pushed my luck, finally caught up with me... #17  
I goggles brotek and didnt come up with anything. Wanted to check into this as I have a BX25 as well and don't want to be "unprotected"
Look under your BX25 and see if it does/doesn't have the bigger factory installed cover plate. Then make your decision as to whether you want to add additional covering.
 
   / Pushed my luck, finally caught up with me... #19  
Look under your BX25 and see if it does/doesn't have the bigger factory installed cover plate. Then make your decision as to whether you want to add additional covering.

Good idea. My 2008 BX25 did not come with it, but elsewhere on TBN people were saying that Kabota put them on for later years.
 

Tractor & Equipment Auctions

Agway Bale Accumulator (A50515)
Agway Bale...
2016 KBH Fertilizer Tender Trailer - Isuzu Diesel, Hydraulic System, Rear Discharge (A52128)
2016 KBH...
UNUSED JCT SKID STEER QUCK ATTACH 72" BRUSH CUTTER (A51244)
UNUSED JCT SKID...
2019 Fecon BH74SS Hydraulic Mulcher High Flow Skid Steer Attachment (A51691)
2019 Fecon BH74SS...
King Kutter Rotary Tiller Tractor Attachment (A51691)
King Kutter Rotary...
CASE TR270B SKID STEER (A51242)
CASE TR270B SKID...
 
Top