Cannot Remove Jinma Glow Plugs

   / Cannot Remove Jinma Glow Plugs
  • Thread Starter
#11  
Thanks to all. I used Never-Seez on thds. Next step is Wolverine under sump. I was away out of country on business and returned yesterday so this job just had to get done today before snow comes.

Now with the AutoZone starter relay and 10 ga wire going to the bus bar on the GP, I'm all set for snow with the Meyer plow replacing bucket on loader, front remotes, Prince control valves on fender, etc.
 
   / Cannot Remove Jinma Glow Plugs
  • Thread Starter
#12  
Last night was in the low 20's and this morning, after a count of 15-20, it started right up on all three cylinders. Mission accomplished.
 
   / Cannot Remove Jinma Glow Plugs #13  
MAn! Dont try that. those are fixed! you're eventually gona eng up breaking the stuff
 
   / Cannot Remove Jinma Glow Plugs #14  
What. This guy again?:laughing:

Chris
 
   / Cannot Remove Jinma Glow Plugs
  • Thread Starter
#15  
What is he talking about????
 
   / Cannot Remove Jinma Glow Plugs #16  
MAn! Dont try that. those are fixed! you're eventually gona eng up breaking the stuff
I think he believes he's in a different forum.

Do not attempt a battle of wits with an unarmed man :dance1:
 

Tractor & Equipment Auctions

1998 CATERPILLAR D5M PIPE LAYER (A50854)
1998 CATERPILLAR...
2021 Interstate Tiltbed 40TDL 24 Ton T/A Flatbed Trailer (A49461)
2021 Interstate...
1994 Toyota 6000lbs 2 Stage Forklift (A51039)
1994 Toyota...
2008 CATERPILLAR D6K LGP PIPE LAYER (A50854)
2008 CATERPILLAR...
2004 Hydraulic Breaker Excavator Attachment (A49461)
2004 Hydraulic...
John Deere Hsld 2510 H Nh3 Applicator (A50514)
John Deere Hsld...
 
Top