gregfender
Gold Member
I am looking for some ideas on building a pole barn/shed for my equipment. Nothing too fancy...most likely a gravel floor and apron and if i get ambitious, i might add a workshop on the end. Anyone built anything similar?
Building a pole barn/tractor shed
- Thread starter gregfender
- Start date
- Views: 4750
LD1
Epic Contributor
Pleanty of members here have built pole barns. Do a search and you can spend hours reading and looking at pictures.
Best advice I can offer you is to build it as big as you possiblty can.
And once you do a search and read a lot, post back if you have any specific questions.
Best advice I can offer you is to build it as big as you possiblty can.
And once you do a search and read a lot, post back if you have any specific questions.
Soundguy
Old Timer
- Joined
- Mar 11, 2002
- Messages
- 51,575
- Location
- Central florida
- Tractor
- RK 55HC,ym1700, NH7610S, Ford 8N, 2N, NAA, 660, 850 x2, 541, 950, 941D, 951, 2000, 3000, 4000, 4600, 5000, 740, IH 'C' 'H', CUB, John Deere 'B', allis 'G', case VAC
i had a metal building ( open on the ends) put up for my tractors. was cheap and went up fast.
soundguy
