cordwood saw
- Thread starter TL SASK
- Start date
- Views: 9081
Treemonkey1000
Veteran Member
Not sure what it is to tell you the truth.. My cordwood saw says Husqvarna or Stihl on it.
TRR
Gold Member
Here's a cordwood saw in action:
YouTube - One work cycle of a mid-50s cordwood saw
I'm not aware of anyone who makes one, I would think a chainsaw would be easier and safer, but the cordwood saw shouldn't be to hard to make. The hardest part would be powering it, but that shouldn't be hard either.
YouTube - One work cycle of a mid-50s cordwood saw
I'm not aware of anyone who makes one, I would think a chainsaw would be easier and safer, but the cordwood saw shouldn't be to hard to make. The hardest part would be powering it, but that shouldn't be hard either.
beenthere
Super Star Member
- Joined
- Aug 16, 2001
- Messages
- 18,563
- Location
- Southern Wisconsin, USA
- Tractor
- JD_4x2_Gator, JD_4300, JD_425, JD_455 AWS, added JD_455, JD_110, JD_X485(sold)
We normally called it a buzz saw, so there may be some confusion. Spent many an hour running wood through them in the day.
They are listed on eBay and CL once in awhile. There are a number around, but as mentioned the chainsaw working over the pile of sticks would be faster. Some think they are dangerous but not moreso than other equipment (such as a chainsaw
).
Once the wood is in a neat pile like the video shows, then at least one extra person to keep the saw operator busy helps a great deal. Same as a helper tossing sticks up on a sawhorse for a chainsaw operator to buzz off would be faster.
That buzz saw shown in the video needs a good sharpening. Should zi-ing through that small wood much quicker than it is shown.
Building one shouldn't be a problem if you can find the saw blade to start with. Now they are usually converted over to PTO shaft power.
They are listed on eBay and CL once in awhile. There are a number around, but as mentioned the chainsaw working over the pile of sticks would be faster. Some think they are dangerous but not moreso than other equipment (such as a chainsaw
).Once the wood is in a neat pile like the video shows, then at least one extra person to keep the saw operator busy helps a great deal. Same as a helper tossing sticks up on a sawhorse for a chainsaw operator to buzz off would be faster.
That buzz saw shown in the video needs a good sharpening. Should zi-ing through that small wood much quicker than it is shown.
Building one shouldn't be a problem if you can find the saw blade to start with. Now they are usually converted over to PTO shaft power.
Marveltone
Veteran Member
- Joined
- Jun 20, 2010
- Messages
- 1,411
- Location
- Somewhere north of Roseau, MN
- Tractor
- Fordson Major Diesel, McCormick Deering W4, Ford 1510, John Deere L111
I don't have any plans, but I do have a link to the only company that I'm aware of who still builds cord-wood saws. Here you go: Vermont Woodsman Buzz Saw
I grew up working with a saw powered by my dad's John Deere A. Cut lots of wood in very little time.
Good luck.
Joe
I grew up working with a saw powered by my dad's John Deere A. Cut lots of wood in very little time.
Good luck.
Joe
db556
Bronze Member
forgeblast
Elite Member
The sears david bradly tractors had a buzz saw attachment, you might beable to use it with some work.
xmoto
Bronze Member
Think I am in love!