cwrighttractors
Member
- Joined
- Apr 1, 2011
- Messages
- 35
Hey guys just curious I was recently told that the E model John Deere's like the 3032E were built in China and assembled here in the U.S. Can anyone confirm or deny this?
E Models
- Thread starter cwrighttractors
- Start date
- Views: 1875
AKfish
Super Member
- Joined
- Oct 1, 2004
- Messages
- 5,419
- Location
- Alaska
- Tractor
- JD 5115M; JD 110 TLB; JD 4720; Ford 9N; JD X300R
That would be news to me... Have not heard (or read) of that being the situation with the smaller John Deere CUT models.
But, I'm not necessarily the most current person with the "latest and greatest" info, either!
AKfish
But, I'm not necessarily the most current person with the "latest and greatest" info, either!
AKfish
kennyd
Advertiser
As the Great Sherman T. Potter used to say...hogwash.
OP
cwrighttractors
Member
- Joined
- Apr 1, 2011
- Messages
- 35
Kennyd,
Where are they built then? I also have heard the rear differential is not steel.
Where are they built then? I also have heard the rear differential is not steel.
Scooby074
Super Member
They're made in Nepal and their rear ends are made from hardened yak's milk.
Last edited:
kennyd
Advertiser
Grovetown Georgia: TractorData.com John Deere 3032E tractor information
See also: http://www.deere.com/en_US/deerecom/media/pdf/johndeere_worldwide/uslocations.pdf
It is mo secret that the tranny case's on the 2xxx and 3xxx series tractors are indeed aluminum.
