Operator Position

   / Operator Position #1  

BigBoyinMS

Silver Member
Joined
Nov 15, 2005
Messages
225
Location
Central Mississippi
Tractor
'73 MF135 & Montana 4540
Do any of you than own an LS feel that the seating position (even adjusted to the stiffest and farthest back) is still too soft, too low and too forward? If so, what have y'all done to get a better seat position?

I've been on a few tractors lately since I'm looking to buy a new one and they all seem cramped to me but the LS much more so. I am a big man and the Kubotas, Mahindras, Deeres, etc., that I've been on felt about as I expected but I don't think I could operate the LS without some 4" spacers under the seat mounts and adding another or heavier spring to the ride adjuster. In fact, my petite 5' nothing wife told me that it was just right for her.
 
   / Operator Position #2  
BigBoyinMS said:
Do any of you than own an LS feel that the seating position (even adjusted to the stiffest and farthest back) is still too soft, too low and too forward? If so, what have y'all done to get a better seat position?

I've been on a few tractors lately since I'm looking to buy a new one and they all seem cramped to me but the LS much more so. I am a big man and the Kubotas, Mahindras, Deeres, etc., that I've been on felt about as I expected but I don't think I could operate the LS without some 4" spacers under the seat mounts and adding another or heavier spring to the ride adjuster. In fact, my petite 5' nothing wife told me that it was just right for her.

Which model are you looking at?
 
   / Operator Position #3  
The stock seat on the S3010 has no suspension to speak of for a guy like me (220 lbs) so I had to get something better. It was already a pretty tight fit before and got even tighter after the change out. I got used to it though.
 
   / Operator Position #5  
I'm an old guy that is fading farther away with age at 5'8', 140#. No problem for me with my R4010. Good thing, because I can use the space behind the seat for gloves and stuff.
 
   / Operator Position
  • Thread Starter
#7  
Waitaminnit now! She can't have all the fun!
 
   / Operator Position #8  
Yes...I keep turning the spring stiffener and I keep bottoming out...I haven't hit the end yet though so I still might be ok.
 
   / Operator Position #9  
I'm a lil cramped on mine,I have a 3010 and although I'm not a big guy I am 6'3" tall so my biggest problem is cramps in my right leg from twisting around looking at the box blade when doing alot of grade work. I dont really see anything I can do to help my situation,,I just got used to it(or deal with it)like L.B.T said.
 

Tractor & Equipment Auctions

2020 KUBOTA RTV X1100C UTV (A51406)
2020 KUBOTA RTV...
2020 John Deere 9470R Tractor (A50860)
2020 John Deere...
2003 Big Tex 10PI 16ft. T/A Pipe Top Utility Trailer (A49461)
2003 Big Tex 10PI...
MCELROY COOL PACK 20 (A50854)
MCELROY COOL PACK...
2006 GENIE GTH6622 TELESCOPIC FORKLIFT (A51242)
2006 GENIE GTH6622...
2007 John Deere 4320 Cab 4wd (A51039)
2007 John Deere...
 
Top