V3A loader Attachments

wildcat455 · Jul 12, 2011

Hi folks! Bought me a FX32D a few months ago with a Vteks V3A loader. Wanted to know if anyone has seen any other attachments for it besides the loader. I have goggled it but no hits. I have a quick attach manufacturer within 8 miles of me but theirs is not the same. Guess i could get them to make me some things but it would cost more than if Vteks were making their own. Let me know what you think. Thanks in advance.

kenmac · Jul 12, 2011

are you needing attachments for the 3 point or the loader ? If loader .V tech is a vietnam brand / built loader. Their specs. for loader may be different. as in non standard.If it's non standard, you may have to buy loader attachments from a V tech dealer

clemsonfor · Jul 13, 2011

Building on what Kenmac said. It is either vietnam or chineese used by the vietnameese rebuilders. I dont think they sell vtec quick attach anything. Your prolly gonna have to fabricate it your self.

Car Doc · Jul 13, 2011

That's a good question my buddy's "new" 1610D came with a v2a and its got a quick attach bucket.

I thought that was a very cool thing and I asked the delivery guy about it and he didn't know what was available if anything?

They didn't build it that way for nothing so sooner or later you will be able to get attachments I am 100% sure on that if they aren't available now. :thumbsup:

Welcome to the Yanmar forum btw!

clemsonfor · Jul 13, 2011

Car Doc said:
That's a good question my buddy's "new" 1610D came with a v2a and its got a quick attach bucket.

I thought that was a very cool thing and I asked the delivery guy about it and he didn't know what was available if anything?

They didn't build it that way for nothing so sooner or later you will be able to get attachments I am 100% sure on that if they aren't available now. :thumbsup:

Welcome to the Yanmar forum btw!

Was this the buddy that was deciding where to get his yanny? I guess he went with a VN and not from RCO if he has a v2 or vtek loader

Car Doc · Jul 13, 2011

clemsonfor said:
Was this the buddy that was deciding where to get his yanny? I guess he went with a VN and not from RCO if he has a v2 or vtek loader

Roflmao why yes all that is true!

wildcat455 · Jul 13, 2011

I meant to say bucket not loader when i started this thread. I kinda figured i would have to build or have someone build forks or any other attachments for it. I know i got a VN rebuild but have so far not had any issues with the tractor or loader. I used it to dig a hole in a dirt bank 35 feet long and 6 feet wide. When i finished it was 6.6 ft at the deepest part. My family was very impressed as was I. Going to do a little logging and land clearing for a large garden. Thanks for the input and great forum guys.

Scotty Dive · Jul 13, 2011

wildcat455 said:
I used it to dig a hole in a dirt bank 35 feet long and 6 feet wide. When i finished it was 6.6 ft at the deepest part. My family was very impressed as was I. QUOTE]

PICTURES!

clemsonfor · Jul 13, 2011

wildcat455 said:
I meant to say bucket not loader when i started this thread. I kinda figured i would have to build or have someone build forks or any other attachments for it. I know i got a VN rebuild but have so far not had any issues with the tractor or loader. I used it to dig a hole in a dirt bank 35 feet long and 6 feet wide. When i finished it was 6.6 ft at the deepest part. My family was very impressed as was I. Going to do a little logging and land clearing for a large garden. Thanks for the input and great forum guys.

I think we all know what you meant. I actually was thinking QD bucket and not loader, that would not even make sense? Who knows, but yea were with you like a QD set of forks or hay spear or grapple etc etc.