Pulling Metal Fence Posts

   / Pulling Metal Fence Posts #11  
If using your FEL, be careful, I lifted one of the rear tires off the ground trying to pull t-post with my old Ford 4000. Wound up buying a HF post puller. Worked like a charm.
Have fun and stay safe.....

Back wheels off the ground?........Thats how you know your at max leverage!!:laughing:
 
   / Pulling Metal Fence Posts #12  
Maybe it's time to learn or re- learn how to tie the clove hitch knot the simple way and quit fooling around rapping the chain around and through itself until you are plumb tuckered out.:D

+1. Lots of grip and T-posts don't stand a chance. I wouldn't even care to guess how many posts I've pulled this way.
 
   / Pulling Metal Fence Posts #13  
Hit the T polst further into the ground by an inch and then pull it out.
 
   / Pulling Metal Fence Posts #14  
I've successfully pulled many metal t-posts by using just a chain & an 8' long 2x6 (10' or 12' is even better, but 8' works).

I have used the same Idea and it works great, I have also used my FEL, also works great. BUT if I'm pulling allot of t-post, I use my t-post puller, much faster than leveraged or FEL. I bought mine for $15 in 1990, but they aren't hard to make.


Use this with FEL or 3 point (easier than chain) cheap too
Little Mighty Man T-Post Puller Each

This is an easy hand one (easy to make if you can weld)
T-Post Puller
 
   / Pulling Metal Fence Posts #15  
Short length of chain and front end loader or 3 point hitch. Works best with a partner. Partner wraps chain around T post attaches to lowered FEL. Driver lifts the FEL and moves to next post. I have a quick hitch so I have a place to attach a chain. Works the same.
 
   / Pulling Metal Fence Posts #16  
I've used the clove hitch method for years, but I'll tell ya that the teeth on a ratchet rake will pull t-posts out real quick with the loader. I bent the first couple of posts thinking that it would be tougher than it was. A nice gentle bucket curl and out they come.
 
   / Pulling Metal Fence Posts #17  
If using your FEL, be careful, I lifted one of the rear tires off the ground trying to pull t-post with my old Ford 4000. Wound up buying a HF post puller. Worked like a charm.
Have fun and stay safe.....

What kind of a light weight are you?? 1 Wheel off the ground.:laughing::laughing:

You know you are really pulling when you have 3 of them off the ground. Not a wimpy little tractor - Try it with a Deer 210. :thumbsup::thumbsup::thumbsup:
 
   / Pulling Metal Fence Posts #18  
i bought a t-post puller at a farm store,works effortlessly.i think it was 20-25 bucks,worth every penny.
 
   / Pulling Metal Fence Posts #19  
Real men can walk up to the t-post, bend over, bite the post, stand up straight, spit the post out and move to the next one. Right?
 
   / Pulling Metal Fence Posts #20  
Hey Crash, I did get three wheels off the ground... once... the fourth one blew the tire off the rim. I was off that thing so fast I hardly knew I moved. :) Off the high side, by the way. SWMBO did not approve my skills.... go figure. Have fun and stay safe
 

Tractor & Equipment Auctions

2011 Ford F450 Diesel with Just 156638 Miles (A55218)
2011 Ford F450...
UNUSED LANDHONOR LHR-EPC40 PLASMA CUTTER (A54757)
UNUSED LANDHONOR...
7033 (A51691)
7033 (A51691)
Electric Mobility Scooter (A51694)
Electric Mobility...
BUSH HOG BH215 - 5' ROTARY MOWER (A51406)
BUSH HOG BH215 -...
UNUSED DIGGIT 6'5"-10 DRAWER, 2 CABINET WORK BENCH (A54757)
UNUSED DIGGIT...
 
Top