Makeshift welding table
- Thread starter IslandTractor
- Start date
- Views: 10013
OP
IslandTractor
Super Star Member
- Joined
- Sep 15, 2005
- Messages
- 15,802
- Location
- Prudence Island, RI
- Tractor
- 2007 Kioti DK40se HST, Woods BH
Would you use those without disconnecting your battery??
I've thought that using a spare skidsteer attachment plate with a couple of receiver hitches and a mating table or set of tables (one for cutting, one for welding, maybe one for bending etc.) would be a great way to have a portable and height flexible metal working set up. However the fear of frying electrical components on the tractor has disuaded me to date. I suppose one could install an insulator somewhere in the mount (?rubber or silicone sheet over the tractor side skidsteer adapter).
rcowan
Gold Member
Shield Arc
Super Member
On my very first job right out of welding school I had to cut something with a O/A torch, there was a real handy concrete floor about 12-inches high from the dirt. Luckily for me I didn't take the time to put on my burning goggles just flipped down my welding hood, and started burning. BAM! WTF was that
?! Looked down and a big chunk of the slab was missing!undercut
Silver Member
Is there a back story
RC
Shield Arc's story was pretty entertaining. I don't have one personally (and thankfully for that). I did hear about this danger and figured it was worth passing along as it never occurred to me until I heard it.
deereman75
Veteran Member
- Joined
- Apr 29, 2011
- Messages
- 1,912
- Location
- canada
- Tractor
- Deere 2120, Warner & Swasey 6000# offroad forklift, Case W9B loader, various non-running decorations
Speaking of the concrete, I saw a picture where someone sat a charcoal chimney starter for their bbq on a concrete driveway, and lit it. WHen they lifted it to dump the coals in the bbq, there was a circle of spalling the size of the chimney on the driveway. Looked like someone whacked away at it with a hammer for a while.
yankeerider
Platinum Member
I'm a bit embarrassed to admit I didn't recognize the term "Swamp Yankee." I looked it up here http://en.wikipedia.org/wiki/Swamp_Yankee and then knew why I didn't recognize it- I come from Western Massachusetts and Vermont!
Still on topic- growing up as a kid in the mid-60s, I remember my best friend entertaining himself by using his father's torch to heat up the concrete floor in their garage until it exploded. it's a miracle we never suffered any injuries beyond scrapes and cuts from that. It was the same torch we used to cast lead toy soldiers- his dad was a plumbing contractor.
Still on topic- growing up as a kid in the mid-60s, I remember my best friend entertaining himself by using his father's torch to heat up the concrete floor in their garage until it exploded. it's a miracle we never suffered any injuries beyond scrapes and cuts from that. It was the same torch we used to cast lead toy soldiers- his dad was a plumbing contractor.
k0ua
Epic Contributor
It sounds to me if them thar "Swamp Yankees" and us "Hillbilly's" would get along pretty good.:thumbsup: I am thinking we are one and the same. Long lost cousins as it were.
James K0UA
