Buty
Silver Member
I want one but I don't think my post count is up to par. Let me know if I can buy one too.
LONGEVITY Welding Customer Appreciation For January 2013 - Happy New Year Everyone!
- Thread starter LONGEVITYsimon
- Start date
- Views: 4266
I want one but I don't think my post count is up to par. Let me know if I can buy one too.
murphy1244
Super Star Member
- Joined
- Nov 25, 2011
- Messages
- 16,336
- Location
- Ohio
- Tractor
- Kubota 1120 RTV Kioti DK-40, MF-135, Ventrac 4500Y
:welcome: One per month and you better get posting.
Buty
Silver Member
OK...how's that?
murphy1244
Super Star Member
- Joined
- Nov 25, 2011
- Messages
- 16,336
- Location
- Ohio
- Tractor
- Kubota 1120 RTV Kioti DK-40, MF-135, Ventrac 4500Y
2 in a row, Good start.
Buty
Silver Member
Seriously, I'd like to pull the trigger on a 80i "this morning". EST
/ LONGEVITY Welding Customer Appreciation For January 2013 - Happy New Year Everyone!
#27
OP
LONGEVITYsimon
Bronze Member
Hi Guys,
Fred, who drives a freightliner spoke for it over the phone earlier this week. His id is FREDH. Please lookout for more of these promotions. Also, subscribe to our youtube channel, as we are going to do more of these promotions on there as well longevitywelding's channel - YouTube
FredH
Platinum Member
Sorry Guys , As Simon Stated , I already Jumped on the deal . Not a plasma cutter but instead got a Migweld 200S , so I will be posting a thread within the month on my experience . Will " MAYBE " post pictures of welds , but being just a Hack at best , Maybe not .:ashamed:
Have not used a stick welder in over 30 years , so that aspect of the 200s maybe entertaining while my mig welding has been limited to using my Lincoln SP135 for the projects I have built . The Only Bad thing about all this , is that the little Lincoln had a low duty cycle at high amps , Thus More Breaks , less " Honey Do " lists things to be done .:thumbsup: But with the new 200S , A lot higher duty cycle means faster completion of projects thus I see more time spent looking at my better halfs " To Do " list . Geez Simon , See What You got me into !!
Fred H
Have not used a stick welder in over 30 years , so that aspect of the 200s maybe entertaining while my mig welding has been limited to using my Lincoln SP135 for the projects I have built . The Only Bad thing about all this , is that the little Lincoln had a low duty cycle at high amps , Thus More Breaks , less " Honey Do " lists things to be done .:thumbsup: But with the new 200S , A lot higher duty cycle means faster completion of projects thus I see more time spent looking at my better halfs " To Do " list . Geez Simon , See What You got me into !!
Fred H
Shield Arc
Super Member
Hey I'm just a hobbyist, and I have the nerve to post pictures of my welds. Besides how are we to help you if you don't post pictures?
FredH
Platinum Member
HOBBYIST !!! Yea Right . :laughing: I already figured out what I will do . Going to go out and sand off the paint on the factory welds of my brush hog and say " Look at These " !!:ashamed:
Seriously though , I'll play around with it then let you REAL welders fill me in on what I'm doing wrong . As mentioned though , my last real training was back in the '70's on stick , and the last few years , have took to Mig but that as been through basically self taught , which certainly is not saying much .:confused3:
Fred H.
Seriously though , I'll play around with it then let you REAL welders fill me in on what I'm doing wrong . As mentioned though , my last real training was back in the '70's on stick , and the last few years , have took to Mig but that as been through basically self taught , which certainly is not saying much .:confused3:
Fred H.
