mid mount mower{question for massey guys}

[MFRED]

1526 & 1529 would have Position control unlike the GC series with the control valve. The mower would be the same 60" 1505 just different mountings than the 1523.

 

[Singalo]

1526 & 1529 would have Position control unlike the GC series with the control valve. The mower would be the same 60" 1505 just different mountings than the 1523.

Quick question, can you help me understand why you say the GC does not have PC?

Please post reply here: http://www.tractorbynet.com/forums/hydraulics/273232-debating-position-control-what-you.html

 

[chub380]

Should be simple to figure out if your tractor has it or not go put something heavy on the 3pt and just measure it every so often if the measurment is smaller chances are it doesnt

 

[SDT]

Quick question, can you help me understand why you say the GC does not have PC?

Please post reply here: http://www.tractorbynet.com/forums/hydraulics/273232-debating-position-control-what-you.html

It does not.


I do not believe that ANY new SCUTs have position control these days.

SDT

 

[Blitzn]

To the original post, one of the reasons I bought mine, unlike the Kubota which on the L-series will ONLY provide a mid-mount on the L40 Grand's - the Massey's can install a mid-mount on any of the 1500 series, and the 1600 series up the 1643.
Hope that helps.

 

[jeepcj7]

The 1523 was replaced by the 1526. Apparently there is a brand new 1523 at the AGCO plant in Hesston KS looking fr a home - I was told it has a loader and a mower.