TODAYS SEAT TIME

[MossflowerWoods]

My neighbor recently sold his 60hp tractor (he is moving this summer and downsizing).

So Yesterday I got 20-30 min of mucking out his run-in shed back dragging with the bucket.

It was nice to be in the saddle again.

Be well,
David

 

[sixdogs]

My neighbor recently sold his 60hp tractor (he is moving this summer and downsizing).

So Yesterday I got 20-30 min of mucking out his run-in shed back dragging with the bucket.

It was nice to be in the saddle again.

Be well,
David

Wow, summer is rapidly creeping up from the South and before long we'll all be mucking something out. Come on, warm weather and kiss this cold goodby.

 

[vtsnowedin]

I changed the hydraulic oil filter at the 100 hour mark yesterday and have to change out the break-in oil and filter today after I clean up the inch or so of snow I got last night. 17 degrees F here this morning and still some light snow so no great hurry. Time for my second cup.

 

[MossflowerWoods]

Wow, summer is rapidly creeping up from the South and before long we'll all be mucking something out. Come on, warm weather and kiss this cold goodby.

Six,

Wed the forecast is for snow/rain and the days after that jump up to 50's hi, 40's lows for a few days, only a couple nights below freezing so I suspect spring is coming sooner rather than later...

David

 

[sam5570]

got some seat time my self yesterday, my arms felt like dish rags last night i spread over 6000 lb of lime and it was all in 40 lb or bigger bags. still got to get about 12,000 lb more but not got it here yet.

 

[MARKMILES77]

Let my 10 year old son use the rotary cutter (or slasher as we call it in Australia) for the first time.
Took to it like a duck to water!


Yanmar EA 2400 rotary cutting - YouTube

 

[linuxman51]

moved the cross ties out to the area where the veggie beds are going on the minifarm

Being new to this whole game, it took me a little while to figure out a workable system, 2 at a time on the bucket was going to take forever...

need to reinforce the top of the bucket, and probably the hydraulic cover there as well. neither are bent, but there's some paint missing now in a couple of spots.

 

[Gary Fowler]

I got about 5 minutes seat time on my lawnmower shredding some leaves and dried mum tops that I cleaned out of the wife's flower bed. Ran just long enough to heat it up and then pulled it to the shop and changed the oil and filter in prep for coming of spring. Also aired up my Kubota RTV tires from 7 PSI to 20 PSI, now ready to haul whatever I need. No tractor time though

 

[bigbull338]

i got 15 or 20 mins seat time just riding the kubota an tilling some.

 

[JD230511]

None today. But I just want to say this cold snowy weather is killing me!!! I'm ready for nicer tractor weather, or a tractor with a cab!!! Lol. ( wife would kill me if I bought a tractor with a cab right now)

 

[Gordon Gould]

Still winter here. I get jealous reading of the spring work some of you guys are doing.

 

[Gary Fowler]

Yesterday I used my B26 TLB to off load 12 railroad crossties from my truck, then placed 4 of them and staked them down in the preparation to build a raised bed garden spot on as 25x40 slope. It slopes 24" in 25 feet so hence the crossties to make a retainer wall at the bottom. Compared to the rest of the yard this spot looks almost level . Got to get back at it this morning as soon as I finish my coffee. Gonna be a nice day with the low temp last night of 38F.

 

[Xfaxman]

I moved an old brush pile that was too close to trees to burn, to a new pile down the hill were it can be burned.

 

[Carl Bert]

8 to 10 inches of heavy wet snow dropped last night and his morning. Weather man was way off with his forecast of 1 to 3 . Must be nice having a job that you can be wrong more often than right and still keep your job lol. Anyway, probably the last bit of seat time I'll get this year blowing snow. Question is do I take the chance and put the blower away for the season, or do I give it another week or so?

 

[mpham]

10 or so heavy wet inches of snow here today also. Got a couple hours of seat time blowing and scraping.

 

[amigauser]

Yup, my area of CT also got around 9 or 10 inches. I waited until 4pm after work and it had compressed down to 5 or 6 inches with the warming today. About a 1/2 hr of plowing.

 

[GBOUTDOORS]

Plowed the driveway this morning (700') the 1-2" they called for turned to 9". No building going on today as all my jobs are in the rough frame stage so stayed home and plowed out the three houses at the end of the drive. Then filled the bucket twice with wood for the weekend. Miller time.

 

[Gary Fowler]

Nice and sunny today with 68F temps. I got quite a bit of seat time as in all day with my B26 using the back hoe to dig out for leveling the cross ties base then used the thumb to lift and set the ties in an area about 25 wide by as deep as I want for a garden. I would have been in traction by now if having to try to lift those by hand. After I got the ties in and rebar staked, I got my LS in with the FEL to remove the topsoil in the pen because I have to bring in about 12" of lift to level the area then put back the 6" of top soil that I took out.

 

[Gordon Gould]

Cloudy but nice day here today. Didn't get the snow they got down south. 40 degrees and windy enough that all the snow came off the trees. Did some thinning. Pulled a little out and made a pile for my neighbor to cut and use for summer hot water wood in his outdoor boiler.

 

[Bob77064]

Got my tractor out today and picked up tree limbs, carried them to the burn pile. Then took the grandson for a ride at a very low speed.