Well today I worked the backhoe helping the neighbor dig her septic lids and would you know I had a hydraulic leak on the backhoe. I called my dealer and 10 mins later it was being worked on. The hydraulic leak was fixed and I was back working in 15 mins. I was told there was a service bulletin put out around the time mine was delivered. The problem was the swing cylinder line was loose. Also I was left with a unopened gal of UDT hydraulic Fluid to add if it becomes low. So I was just to letting everyone know, make sure your hydraulic lines are not leaking on new machines since there is a bulletin for this common problem.