3-Point Hitch Quick hitch
- Thread starter rlluellyn
- Start date
- Views: 5449
-
- Tags
- quick hitch
murphy1244
Super Star Member
- Joined
- Nov 25, 2011
- Messages
- 16,335
- Location
- Ohio
- Tractor
- Kubota 1120 RTV Kioti DK-40, MF-135, Ventrac 4500Y
JOHNTHOMAS
Super Member
- Joined
- Apr 14, 2008
- Messages
- 7,717
- Location
- Somerset, Ky
- Tractor
- F2690 4WD RTV X1140 MX5400 HST ZD1211
Here are some Pat's at an unbelievable price. First looker will probably be the first buyer.
OBO Pats Premium Catergory 2 Quick Change 3 Point Hitch Tractor | eBay
They used to have some that I use made in Indiana for under $100 but not showing today. I had Pat's and sold them.
OBO Pats Premium Catergory 2 Quick Change 3 Point Hitch Tractor | eBay
They used to have some that I use made in Indiana for under $100 but not showing today. I had Pat's and sold them.
Get a John Deere imatch. I don't think it can be beat for the price and quality.
With Pats easy change you will need a longer toplink and the thing to hold the lift arms in place.
With a quick hitch you will need quick hitch compatible equipment.
With Pats easy change you will need a longer toplink and the thing to hold the lift arms in place.
With a quick hitch you will need quick hitch compatible equipment.
Tractor Seabee
Elite Member
- Joined
- Oct 5, 2011
- Messages
- 3,896
- Tractor
- Kubota BX25
I use a HF, cheap; but does not come with all the bushings and pieces the others do. Put it all together for half the price of a Land Pride the dealer wanted to peddle.
Ron
Ron
Here is a video I made showing some of the differences between a harbor freight QH and a JD Imatch
There are a few modifications that need to be made to a harbor freight quick hitch to get it going. Click the link in my sig.
There are a few modifications that need to be made to a harbor freight quick hitch to get it going. Click the link in my sig.
Luv2Q
New member
- Joined
- Oct 1, 2010
- Messages
- 18
- Location
- Central TX
- Tractor
- Kubota B2320, Ford 601 (gone but not forgotten), Ford 8N (ditto)
X2. The higher-quality gear is sure nice but the HF has been acceptable for my needs (LP rotary cutter aka shredder, LP rake, Armstrong box blade, brand X grader blade). I haven't needed to modify anything.
tractorshopper
Veteran Member
I bought the Pat's when I bought my tractor. I did end up buying a longer top link due to the additional length the Pat's adds. I'm actually very glad I did though. The new top link was like $30 and is a much better and way more easy to adjust top link than what came on the tractor originally. I have all my attachments set at the same widths for the lift arms and I find it so simple to change implements by myself. 94BULLITT mentions something to hold the lift arms in place. I'm not sure what that is, because I don't have that and apparently don't need that. Maybe some do and some don't.
newbury
Super Star Member
- Joined
- Jan 8, 2009
- Messages
- 14,115
- Location
- From Vt, in Va, retiring to MS
- Tractor
- Kubota's - B7610, M4700
Also with a PEC you might need to "lengthen" your PTO shaft. A $20 or less piece at Agri-Supply.
On a BX you will need something to hold the lift arms out. They have "check chains" not telescopic stabilzers. Look at Pats website, they have a bar for this.