80t - AC Plus welding rods?

[bandaidmd]

I think this is the one they used to package in the consumer packs, if so its a awesome rod.

EutecTrode® 680 | Castolin Eutectic

Anyone else familiar with Eutectic/castolin ? I sure wish there was a supplier close to me.

 

[eutecticjim]

I work for Eutectic/MG. 80T-AC+• This alloy was designed as a superior fit-up, assembly and tack rod*** for all low carbon steels.• Features touch strike and re-strike characteristics.• Ultra low spatter and easy slag removal.• Use with AC or DC (either polarity).• Value packed in an attractive multi-colored corrugated carton. With a 80k tensile strength. The Eutectic 680 is for joing all metals and is great for broken bolt/stud remover. Please feel free to contact me at jim.fishereutecticusa.com and I will get you taken care of.

 

[weldermike]

I work for Eutectic/MG. 80T-AC+• This alloy was designed as a superior fit-up, assembly and tack rod*** for all low carbon steels.• Features touch strike and re-strike characteristics.• Ultra low spatter and easy slag removal.• Use with AC or DC (either polarity).• Value packed in an attractive multi-colored corrugated carton. With a 80k tensile strength. The Eutectic 680 is for joing all metals and is great for broken bolt/stud remover. Please feel free to contact me at jim.fishereutecticusa.com and I will get you taken care of.

Jim where are you located? We used to have a salesman from eutectic named Jim stop by all the time. Hated my boss but got along great with me. Very nice fellow. It would be great if this turns into a small world occasion. I left that job along time ago and wondered how that guy was doing every time I see a red and yellow container! LOL! Oh, 680s rock! One of the slickest smoothest rods out there. I must have burned up 10,000lbs of them.

 

[eutecticjim]

Mike I am in northern IN. I hope it was not me I get along with just about anyone. Where are you located and who was the comp you use to work for? We have three or four jims that work for us and I could guess a couple of them that would be that way. Well if your ever in need of some let me know. I can always send out a sample pack to let you "Demo it".

 

[weldermike]

Sent you a Pm Jim. Oh forgot to mention my boss back then was a major B.S.A. and wasn't liked by many!