holtzacres
Member
We got our new x754, probably wont be able to try it out as there is snow on the ground now. guess we will just sit on it and look at it for a few months until spring.
Got our new X754
- Thread starter holtzacres
- Start date
- Views: 7674
We got our new x754, probably wont be able to try it out as there is snow on the ground now. guess we will just sit on it and look at it for a few months until spring.
CinderSchnauzer
Veteran Member
- Joined
- Apr 26, 2006
- Messages
- 1,397
Very nice - Congrats.
I was very tempted to go with the X754 to get the 4WS, but I have some areas where my old 2WD spins out, so wanted the 4WD as well. Compromise was the x739 - gas - not diesel. Bit of snow here in last few days, so mine will be sitting until spring as well.
I was very tempted to go with the X754 to get the 4WS, but I have some areas where my old 2WD spins out, so wanted the 4WD as well. Compromise was the x739 - gas - not diesel. Bit of snow here in last few days, so mine will be sitting until spring as well.
Wagtail
Super Star Member
- Joined
- Jan 15, 2013
- Messages
- 12,663
- Location
- St Helens, Tasmania, Australia
- Tractor
- JD 4105 / JD Z355E (48" deck)
Congrats on the new tractor & ta for the piccies, Mate!
donpauli
New member
You guys need the 47 inch quick tach
Blower and use those machines.
I have an X724 with blower and blade
And have great results with both
Also 62 inch mower deck
Blower and use those machines.
I have an X724 with blower and blade
And have great results with both
Also 62 inch mower deck
donpauli
New member
You guys need the 47 inch quick tach
Blower and use those machines.
I have an X724 with blower and blade
And have great results with both
Also 62 inch mower deck
Blower and use those machines.
I have an X724 with blower and blade
And have great results with both
Also 62 inch mower deck
CinderSchnauzer
Veteran Member
- Joined
- Apr 26, 2006
- Messages
- 1,397
If you have included me in your "you guys need......." suggestion - I have a 60" Snow Blower on the 3320 CAB - where I can sit in heated comfort with an adult beverage, so the X7 will be sitting in the heated shed until spring.:thumbsup:
donpauli
New member
My apologies Cindy or CinderSchnauzer yes you are included and NO disrespect intended. Yes with that larger equipment I get your point and you must have a lot bigger area to clear.
I was just indicating the 47 inch unit does a very good job for its size
I was just indicating the 47 inch unit does a very good job for its size
donpauli
New member
jgayman: On my X724 a bolt and washer hold the ball bearing unit in place and are covered by a rubber cap. I think tractors with 4 wheel drive have 5 bolt front wheels
Thanks. That was about the only configuration that made sense but I couldn't find any photos that showed a close-up of the wheel.
