All copper ground clamp

[Brad_Blazer]

McMaster-Carr
McMaster lists some at 98% copper. Probably tweco of Lenco Hi-Copper clamps.
Tweco Copper Ground Clamp - 300 Amp GC 300
500AMP COPPER WELDING GROUND CLAMP - Amazon.com
There are some negative reviews on the Twecos complaining about the high spring rate so they might double as grip exercisers.

 

[aczlan]

What is the point anyway? I have gotten into the habbit of clamping on any large pair of vice grips that are handy when Mig Welding. Then I take my large brass ground clamp and kind of clamp it into the vice grips because I'm so **** tired of the brass clamp either not making contact because it's not sharp or coming off at the most inopertune moments! I'm kind of thinking of doing away with the brass clamp altogether and just attach my ground to a pair of vice grips.

I know someone who did that. He welded a bolt to the top of the "fixed" jaw of his vise grips and would attach his ground wire to that. Worked well for thin stuff (under 3/4").

Aaron Z

 

[Shield Arc]

There are some negative reviews on the Twecos complaining about the high spring rate so they might double as grip exercisers.

I have a couple small Tweco ground clamps, I think they are rated at 200-amps. They are for a jumper ground lead from my welding table to my tripod chain pipe vice. They are a challenge to open up!:shocked:

 

[Industrial Toys]

My friends that do a lot of welding, like probably millions of welds, just use an old hook made out of say 5/8" wire rod, that they drape over whatever they are working on. Sometimes it just sparks, and they give it a nudge and everything is fine once it arcs itself on, I guess.

I have enough trouble trying to weld without need for poor grounds!

 

[ericher69]

The OP is probably mistaking bronze or brass clamps as cooper, and then when he reads the description that they are bronze, he thinks they are inferior. There would be no reason to even build a copper clamp, they are too soft and weak to hold up to the abuse.

No I am not mistaken. There are pure copper clamps made!

The reason to use pure copper; best conductor of electricity only second to gold.

You don't want to offer any places to find these then don't bother replying...

Sent from my iPhone 5s 64Gb using TractorByNet

 

[Industrial Toys]

N I C E !


And B T W,,,You are WRONG!

SILVER FIRST (Although it does tarnish)

COPPER SECOND

GOLD THIRD!

 

[DXN1EL]

I like the looks of this one Airgas - RAD64002114 - Radnor® Model LGC-300 300 Amp Heavy Duty Copper Ground Clamp

 

[DXN1EL]

Airgas - RAD64002097 - Radnor® Model GC-600-50 Tweco® Rotary Style 600 Amp Copper Ground Clamp
Airgas - TWE9250-1144 - Tweco® Model RG-440 1500 Amp Roto Ground Ground Clamp
Airgas - TWE9210-1202 - Tweco® Model GC-600-TMP 600 Amp C-Clamp Style Ground Clamp With Tweco® Male Plug
Airgas - TWE9210-1150 - Tweco® Model GC-600-50 500 Amp C Clamp Style Ground Clamp

 

[ericher69]

What is the point anyway?

point is that's what I want

N I C E ! And B T W,,,You are WRONG! SILVER FIRST (Although it does tarnish) COPPER SECOND GOLD THIRD!

WHY ARE YOU YELLING?? I stand corrected...Medal for you! Talk about taking something to heart. Glad your vise grip trick works for you. I don't have a million clamps yet so need them when I build something.

Last time I searched there where no ground clamps made of silver or gold...

Sent from my iPhone 5s 64Gb using TractorByNet

 

[Industrial Toys]

Thought I could be a miserable SOB!

My friends who have been welding since they were probably in diapers would likely have a good laugh at your copper ground clamp request. If you do all the figuring of the given circuits materials and resistances, I'm almost certain THAT (There I go yelling again!) would make as good as no difference what so ever.

Hope you find what you are looking for.

Have a nice day.