My brother say's I'm pimpin out my tractor! (CANOPY)

   / My brother say's I'm pimpin out my tractor! (CANOPY) #31  
That's a nice idea,, custom work plus it goods look,, I have a cab and I wear headphones or earplugs cause it cuts out a lot noise.. also have four brothers and they are ugly.:shocked:. what can I say.. nice job on your part.:). Lou
 
   / My brother say's I'm pimpin out my tractor! (CANOPY) #32  
That looks great. You did a good job.
 
   / My brother say's I'm pimpin out my tractor! (CANOPY) #33  
Do you use your tractor in hilly terrain? Do you feel like the center of gravity has been significantly raised? I really want to something like this but I really don't want the underside of my tractor getting a sunburn either.
 
   / My brother say's I'm pimpin out my tractor! (CANOPY)
  • Thread Starter
#34  
Do you use your tractor in hilly terrain? Do you feel like the center of gravity has been significantly raised? I really want to something like this but I really don't want the underside of my tractor getting a sunburn either.

The "lid" is prolly about 200 lbs. and the additonal framework is not much, 12' or so of 2x3 quarter inch wall tube. I do work on hills and that much weight on a 5 ton tractor does not mean much. FWIW I added about 500 lbs. to the bottom of the tractor with a full .25" skid plate from the front axle to the rear axle on a previous project.
 

Attachments

  • DSCN1807.jpg
    DSCN1807.jpg
    303.5 KB · Views: 563
   / My brother say's I'm pimpin out my tractor! (CANOPY) #35  
Your tractor is a lot heavier than mine but my lid probably won't be quited that heavy. I would like to do a skid plate also. With low carried ballast and loaded tires and common sense I think I will do all right.
 
   / My brother say's I'm pimpin out my tractor! (CANOPY) #37  
Awesome build! I love everything you did. This makes me feel like I a total slacker, as I still haven't fixed my flashers.. They haven't worked since I bought the thing. Ha ha
 
   / My brother say's I'm pimpin out my tractor! (CANOPY) #38  
The "lid" is prolly about 200 lbs. and the additonal framework is not much, 12' or so of 2x3 quarter inch wall tube. I do work on hills and that much weight on a 5 ton tractor does not mean much. FWIW I added about 500 lbs. to the bottom of the tractor with a full .25" skid plate from the front axle to the rear axle on a previous project.

That's Purdy!
 

Tractor & Equipment Auctions

2006 FORD F-150XL TRITON EXT CAB TRUCK (A51243)
2006 FORD F-150XL...
2017 John Deere Gator TS Utility Cart (A50324)
2017 John Deere...
2015 INTERNATIONAL MA025 (A52472)
2015 INTERNATIONAL...
2014 Ford Escape SE, Eco Boost (A52384)
2014 Ford Escape...
Kinkaid 1200 LS-PH Towable Hydroseeder (A51691)
Kinkaid 1200 LS-PH...
1263 (A50490)
1263 (A50490)
 
Top