A great success!

[arrow]

I will have to try the double "slam for dump".

There is no such technique. Original poster misinterpreted translation of what he was doing. I've attempted a bunch of techniques but have found no Golden Fleece. There is something about faster dumping in the "loader" owner's manual but even that did not work for me.

 

[madmax12]

There is no such technique. Original poster misinterpreted translation of what he was doing. I've attempted a bunch of techniques but have found no Golden Fleece. There is something about faster dumping in the "loader" owner's manual but even that did not work for me.

Right, James explained it correctly. I used the tractor for a few hours this morning, and it is working. I start dumping, then push joystick further right, to the detent, as James called it. I think mine changes based on rpms, but I could be mistaken. I wasn't really thinking about it, until I saw this thread, just now. And, I don't think I'd really call mine fast dump. Just not as slow. Quick dump makes me picture a non hydraulic hook release, like some of the three point bucket set ups.

 

[Shift4200]

Right, James explained it correctly. I used the tractor for a few hours this morning, and it is working. I start dumping, then push joystick further right, to the detent, as James called it. I think mine changes based on rpms, but I could be mistaken. I wasn't really thinking about it, until I saw this thread, just now. And, I don't think I'd really call mine fast dump. Just not as slow. Quick dump makes me picture a non hydraulic hook release, like some of the three point bucket set ups.

I try to get mine to fast dump 90% of the time I dump the bucket. Never once have I been able to do it. Just feels like I'm going to break something.... (as if i already haven't... heh). Then again, i cant seem to get mine to get past the detent you guys mention. When i push it over that far... the f'in bucket dumps so slow it's not even funny.

-J

 

[madmax12]

I try to get mine to fast dump 90% of the time I dump the bucket. Never once have I been able to do it. Just feels like I'm going to break something.... (as if i already haven't... heh). Then again, i cant seem to get mine to get past the detent you guys mention. When i push it over that far... the f'in bucket dumps so slow it's not even funny.

-J

Wow. Have you tried out another tractor at the dealer to see if it does the same thing? I wonder if the dealer would have any clue about that.

JJ is TBN member who seems to know a lot about hydraulics. I wonder if he would have any suggestions. I think there is a hydraulic sub forum here somewhere.

I'm going back out later and tomorrow, I'll try to see if my bucket is consistent or intermittent like some of the others here.

 

[Shift4200]

Wow. Have you tried out another tractor at the dealer to see if it does the same thing? I wonder if the dealer would have any clue about that.

JJ is TBN member who seems to know a lot about hydraulics. I wonder if he would have any suggestions. I think there is a hydraulic sub forum here somewhere.

I'm going back out later and tomorrow, I'll try to see if my bucket is consistent or intermittent like some of the others here.

I have not tried another tractor at the dealer as of yet. I'm in the midst of a warranty situation that's relative to the loader and the related joysticks and valves. I have mentioned to them that fast dump is something that I've never been able to do.

JJ has chimed in a few times on my loader problem. He is very knowledgeable and always brings things to the table that i would never have thought of. I appreciate his insight every time he offers it....

MM12, i can say that you're the only person (forum or real life) that's told me they've been able to get their bucket to fast dump. Wondering if you have the ability to post a lil vid so i can see how much faster it really is.

-J

 

[k0ua]

I have not tried another tractor at the dealer as of yet. I'm in the midst of a warranty situation that's relative to the loader and the related joysticks and valves. I have mentioned to them that fast dump is something that I've never been able to do.

JJ has chimed in a few times on my loader problem. He is very knowledgeable and always brings things to the table that i would never have thought of. I appreciate his insight every time he offers it....

MM12, i can say that you're the only person (forum or real life) that's told me they've been able to get their bucket to fast dump. Wondering if you have the ability to post a lil vid so i can see how much faster it really is.

-J

My Kioti works well, and the last 2 Kubota's worked well .. I cannot remember much further back. Guys it is not like a hydraulic hose broke, and it slams down or anything like that, it is just some faster than the regular dump function. You throw the joystick all the way to the right, past the first resistance of the regular powered dump.

 

[madmax12]

Yes, it is not a gravity drop dump. Just a faster hydraulic dump. I'll try to video it. Have you sent Dave a PM about it? He's a high up dealer in California. I bet he'd know everything you'd need to know.

 

[arrow]

My Kioti works well, and the last 2 Kubota's worked well .. I cannot remember much further back. Guys it is not like a hydraulic hose broke, and it slams down or anything like that, it is just some faster than the regular dump function. You throw the joystick all the way to the right, past the first resistance of the regular powered dump.

If Shift's lever is like mine, there is no initial resistance. It just stops and takes its time when pushed all the way to the right. It will go no further. Makes me think on both Shift's and mine, something is wrong as even the loader manual describes "regen" position.

 

[Tkblacktail]

If Shift's lever is like mine, there is no initial resistance. It just stops and takes its time when pushed all the way to the right. It will go no further. Makes me think on both Shift's and mine, something is wrong as even the loader manual describes "regen" position.

Arrow, your thread on a "great success" is also a great success; invaluable information being shared here, thanks!

 

[k0ua]

If Shift's lever is like mine, there is no initial resistance. It just stops and takes its time when pushed all the way to the right. It will go no further. Makes me think on both Shift's and mine, something is wrong as even the loader manual describes "regen" position.

Well of course I haven't tried a Mahindra, but I am just going on what I have owned. But that is how it is supposed to work. :confused3: Even the decals on the loader post show the fast dump position.