bunick
Bronze Member
If this was close I think I would be tempted to make an offer.
yanmar tractor, with loader, box blade, disc
yanmar tractor, with loader, box blade, disc
Project for someone
- Thread starter bunick
- Start date
- Views: 1467
bmaverick
Super Member
- Joined
- Sep 17, 2013
- Messages
- 5,799
- Location
- Beloit-WI
- Tractor
- Yanmar YM2610 ■YANMAR GURU■ EXTRAORDINAIRE
That's a nice deal and if only blow by with the piston rings it will take about $1K to fix overall. Less if you know how to remove the head and the oil pan, take the connecting rod off the crank and slip the piston out. Then reverse with new parts and gaskets.
The last thing would be to prime the injectors. There is a youtube video of a person showing how to do this with a JD850 (YM2500/YM2610). Rather easy really.
All this can be done with the engine still on the tractor.
The last thing would be to prime the injectors. There is a youtube video of a person showing how to do this with a JD850 (YM2500/YM2610). Rather easy really.
All this can be done with the engine still on the tractor.
kenmac
Super Member
- Joined
- Feb 13, 2005
- Messages
- 9,835
- Location
- The Heart of Dixie
- Tractor
- McCormick CX105 Kubota MX 5100 HST, Kubota ZD1021, Kawsaki Mule 4010 trans 4x4
I would have a look ,but That's about 4-4.5 HRS away from me 1 way
dustin3207
Bronze Member
Make an offer.
I would drive that for that tractor.
Sounds like an adventure to me.
I would drive that for that tractor.
Sounds like an adventure to me.
kenmac
Super Member
- Joined
- Feb 13, 2005
- Messages
- 9,835
- Location
- The Heart of Dixie
- Tractor
- McCormick CX105 Kubota MX 5100 HST, Kubota ZD1021, Kawsaki Mule 4010 trans 4x4
I don't have time for another project.
