Roll Pins for cat1 QH pins

   / Roll Pins for cat1 QH pins #1  

YesDeere

Platinum Member
Joined
Dec 19, 2008
Messages
972
Location
Merland
Tractor
04/4310
Has anyone one else been able to find just the roll pins for these? I have been to the dealer and to TSC and cannot get them separate. You have to buy the whole kit. I have a few extra that were given to me and need just roll pins.

They are an odd size and I wasn't able to match it up. I have not put a lot of time into it but now I need them.
 

Attachments

  • image-1936668523.jpg
    image-1936668523.jpg
    265.4 KB · Views: 119
   / Roll Pins for cat1 QH pins #2  
I have not tried sourcing the pins, but, if necessary my first stop would be a fastener supply house.
 
   / Roll Pins for cat1 QH pins #3  
Not sure but, think the big box stores, Home Depot, Lowes, etc. have them in their big drawer cabinets of speciality hardware.

Sent from my iPad using TractorByNet
 
   / Roll Pins for cat1 QH pins #7  
Seems metric roll pins skip 11mm and jump from 10 to 12 mm. Both McMaster Carr and Spirol did that.
 
   / Roll Pins for cat1 QH pins #8  
I believe roll pins are sized by the I.D. of the hole it's driven into. So, measuring the O.D. of the roll pin before inserted may not be correct.

I will measure mine in the morning and report back.

Sent from my iPad using TractorByNet
 
   / Roll Pins for cat1 QH pins #9  
Seems metric roll pins skip 11mm and jump from 10 to 12 mm. Both McMaster Carr and Spirol did that.

As I said, probably not too many 11mm rollpins out there. Kuhn equipment is loaded with 5,6,7,8,10,12 & 14 mm pins. Maybe somebody makes 11mm, maybe not.
 

Tractor & Equipment Auctions

2019 CATERPILLAR 303.5E2 CR EXCAVATOR (A52705)
2019 CATERPILLAR...
DOOSAN G25 GENERATOR (A53843)
DOOSAN G25...
JOHN DEERE 3020 TRACTOR (A51247)
JOHN DEERE 3020...
12in Mini Excavator Tooth Bucket (A52377)
12in Mini...
Adams 5T High Clearance Fertilizer Spreader (A53473)
Adams 5T High...
2021 CAN-AM OUTLANDER 650 XMR 4-WHEELER (A51406)
2021 CAN-AM...
 
Top