boggen
Elite Member
- Joined
- Feb 22, 2011
- Messages
- 3,789
- Location
- Trivoli, IL
- Tractor
- SSTT (Sideways Snake Tain Tractor) and STB (sideways train box) tractor, dirt harvester
PTO pump would more likely be a better choice, the overall weight of water/chemicals on a 3pt hitch can add up rather quickly. and cause your front tires to come up off the ground. and you might be better served with a pull behind unit (has its own tires) to offset the weight.
also not to mention the "sloshing" of water, when tank is not completely full. can rock ya back and forth, and forward and backwards.
figure out the max water/chemical in gallons you will need for field / pasture. using booms. might be a starting place. to see what type of tank size you are looking at. and then go from there....
the larger 80 plus gallon tanks, will more likely have an "agitation option" were pump runs water/chemicals back into tank to mix everything, and possibly a "spray bar" in upper portion of tank that can be used to help clean the tank out.
the larger tanks will most likely have a "clear see through" hose for a sight glass to see how much water/chemicals are in the tank.
there maybe an optional electrical package for a spot sprayer hand wand. that diverts water to hand wand when ever you pull the trigger on the hand wand.
other option might be turning valves to agitation setup, and then closing valve to agitation partially and opening valve to spray wand. so you get some pressure at the hand wand.
some spray rigs may have an optional gas engine water pump. vs a PTO pump or electrical pump. some spray rigs may come with a gas engine trash pump. for filling tank via a lake, but might discourage this, due to all the muck that could be sucked up and plug the filters up. or cause chemicals you want to use, to become less effective.
width of boom, amount of sprayers/misters (and type used for a given chemical) will give you some sort of MAX GPM and pressure you will need. to select a PTO pump for GPM / pressure.
---------------------
EDIT:
pending on chemical, you may need a permit and licenses to spray. and/or even a higher grade permit / licenses on some of the chemicals out there, that you will want to use.
also not to mention the "sloshing" of water, when tank is not completely full. can rock ya back and forth, and forward and backwards.
figure out the max water/chemical in gallons you will need for field / pasture. using booms. might be a starting place. to see what type of tank size you are looking at. and then go from there....
the larger 80 plus gallon tanks, will more likely have an "agitation option" were pump runs water/chemicals back into tank to mix everything, and possibly a "spray bar" in upper portion of tank that can be used to help clean the tank out.
the larger tanks will most likely have a "clear see through" hose for a sight glass to see how much water/chemicals are in the tank.
there maybe an optional electrical package for a spot sprayer hand wand. that diverts water to hand wand when ever you pull the trigger on the hand wand.
other option might be turning valves to agitation setup, and then closing valve to agitation partially and opening valve to spray wand. so you get some pressure at the hand wand.
some spray rigs may have an optional gas engine water pump. vs a PTO pump or electrical pump. some spray rigs may come with a gas engine trash pump. for filling tank via a lake, but might discourage this, due to all the muck that could be sucked up and plug the filters up. or cause chemicals you want to use, to become less effective.
width of boom, amount of sprayers/misters (and type used for a given chemical) will give you some sort of MAX GPM and pressure you will need. to select a PTO pump for GPM / pressure.
---------------------
EDIT:
pending on chemical, you may need a permit and licenses to spray. and/or even a higher grade permit / licenses on some of the chemicals out there, that you will want to use.