adjusting clutch on MF 203 workbull

[RD1]

Do anyone know how to adjust a clutch on a MF 203 workbull tractor?

 

[Sportsman762]

Is it a double clutch then follow this. If the tractor is together then use the access plate under the tractor.
http://i91.photobucket.com/albums/k317/JJinBC/Massey Ferguson/B-TO35MF35F40ClutchAdjustments.jpg

 

[RD1]

Is it a double clutch then follow this. If the tractor is together then use the access plate under the tractor.
http://i91.photobucket.com/albums/k317/JJinBC/Massey Ferguson/B-TO35MF35F40ClutchAdjustments.jpg

Thank you for your help. I will try this first thing in the morning.

 

[Sportsman762]

How did it go? I had the same problem with my 20C. The clutch should have been .090 and it was close to 1/4" adjustment. The PTO was terrible to engage.

 

[lukeh]

How did it go? I had the same problem with my 20C. The clutch should have been .090 and it was close to 1/4" adjustment. The PTO was terrible to engage.

Hi there, I am having the same issue with my 20C. The image has expired since you previously posted, would you mind reposting it so I can adjust my clutch and stop this darned drag on the PTO (it DOESN'T spin about 20% of the time, the rest of the time it spins with low speed and torque until engaged, then it goes to full speed and torque).

Many thanks