Where can I buy the 3 pt part of an implement?

[kydick]

i have made several round bale forks. a rear blade. a carry all. a goose neck trailer mover. all 3 point hookup. i used some square tubing for the frame. just make a T. turn it upside down and you have a 3 point frame. weld a bracket for the top bar and a couple brackets for the pins put some braces on it and you are ready to put whatever you want to build on it. if you can build the tool then you can also build the frame.

 

[Wa11banger]

All of you, thank you for your ideas it is much appreciated. I do like the idea of making it where the tool bar is removeable and maybe creating a multimount system for more than one type. Again thanks for the help

For those of you chastising my response to short kid please go reread his post and see if you were told to go read the signs and descriptions at TSC (which by the way he is correct are there) but in fact the part and name I was looking for are not. His post was rude and in no way contributed to the thread.

 

[rgr33]

Well I guess the fact that no one else agrees with your response means they all must be wrong and you are the only one who understands the post correctly.

Try to relax Rick, you are among friends here, and we are only trying to help.

 

[Wa11banger]

Yes because this is constructive and I must have overlooked how it contributed to the question and the topic

seems to me the last time in TSC there was a big sign above the shelf describing all the 3 point parts by name and pictured also. JUST SAYING.

I'm very relaxed, and very thankful for those that provided valuable insight, feedback, and a myriad of options. That is what this site is great for. Each of my responses to anyone I have responded to I have tried to be helpful. Granted in my very limited capability as I am new to all of this. The quote above met none of the criteria and I responded in kind.

Besides, I am ok with everyone else being wrong

 

[TC Wright]

Where can I buy the 3pt mount parts for making an implement? It can be a kit that I have to weld up or can be the basic piece. I have been searching and searching for the 3pt mount parts but am either using the wrong terms or just suck at searching Google for it I am looking to build my own hiller. The reason I am wanting to purchase this part is simply for time savings and would get something semi standard vs. hand making this part.

Thanks
Rick

Try AGRA SUPPLY or Northern Tools. I hope I have the names correct. There is an AGRA SUPPLY in Greenville NC ..........TCZ Wright

 

[docrocky]

I was sadly taken aback by the chastisement that was directed toward Wa11banger for his responses to the TSC advice given. TSC in our area (suburban Toledo,O) has gone from some rather respectable farming/gardening parts to more of a Pet supply and small animal feed and straw. The young lady's working there are very courteous but the store has drastically downsized its inventory for agriculture /tractor/implement parts. They do have a picture on the wall above the bins that have the various pins/lift bars/etc but .little in detail.
Sorry, I don't mean to add any discord here, but be kind to us old timers (78) who love to garden and fool around out in the fields and from all my post you can readily surmise I haven't the foggiest idea of what I am doing, but I nonetheless love what I am doing and certainly rely and thank all the help and advise TBN has provided. Go to CAR TALK and see the continuous put downs and ugly talk...horrific.

While on my tour of duty in Viet Nam 69-70, our favorite response to all dilemmas was: "Don't worry, nothing is going to turn out all right."

 

[Mace Canute]

All of you, thank you for your ideas it is much appreciated. I do like the idea of making it where the tool bar is removeable and maybe creating a multimount system for more than one type. Again thanks for the help

For those of you chastising my response to short kid please go reread his post and see if you were told to go read the signs and descriptions at TSC (which by the way he is correct are there) but in fact the part and name I was looking for are not. His post was rude and in no way contributed to the thread.

I thought your response was appropriate.

 

[David Devuono]

26 in. Drawbar, Cat 1 | Princess Auto

Link to a picture of the item I usually purchase to start a 3pth project.

 

[mark02tj]

While on my tour of duty in Viet Nam 69-70, our favorite response to all dilemmas was: "Don't worry, nothing is going to turn out all right."

That is CLASSIC!!!

And, THANKS for your service!!

 

[bcp]

Looks like one here:

http://www.redlandhill.com/3pt_implement_conversion.html

Bruce