Backhoe Looking for the pin that goes through the bucket on a Kubota BH77 backhoe

[USCG1]

I have a BH 77 that I bought new 4 months ago and the second time It was used it broke the pin that goes through the bucket. This is the pin that has a square tab on one side and the bolts drops through on the other side to keep it from coming out with a grease fitting in the end. I call the dealer that I bought the tractor and backhoe from today and was told that Kubota does not build a BH77 that they only offer a BH 70 and BH75. What freaking idiots that same dealers have working for them. Does anyone know where I can buy this pin? Thanks

 

[whis]

try different dealer, give them the size of yours and see if the other models are same or get one made at machine shop

 

[Kanook]

Here's a pic of the bucket parts list




BH77 BUCKET....click diagram to enlarge

 

[downsizingnow48]

With the parts diagram you can order from local dealer or messicks. B21 uses same bucket pin.

 

[USCG1]

Here's a pic of the bucket parts list <img src="http://www.tractorbynet.com/forums/files/kubota-owning-operating/420976-looking-pin-goes-through-bucket-bucket-jpg"/> BH77 BUCKET....click diagram to enlarge

Thanks for the help, dealer called me back this morning and told me I was wrong about the model. Parts manager told me again that Kubota never made a BH77 but they did make a BH1976 wow really must be some good stuff he was smoking. The part I'm looking for is number 050 in the picture but the part number got cut off the the list.

 

[downsizingnow48]

Go to messicks website they have parts list keyed to parts numbers. There is a bh76 same as bh77 same as bt751 (b21 hoe) with respect to bucket pin.

 

[Brad_Blazer]

From the Kubota website:

050 7K503-42610 PIN
From this page you have to click "accept" then enter BH77 as the model.
Kubota Tractor Corporation - Parts List

 

[Kanook]

Here's one with #50....

 

[aginn]

I wish you had your location shown on your bio. Just curious where there is a dealer that is THAT clueless.

 

[brain55]

The BH77 we started installing today on a B7800 must be an illusion.

Brian

 

[USCG1]

I wish you had your location shown on your bio. Just curious where there is a dealer that is THAT clueless.

I just updated my bio, from west Ky.

 

[USCG1]

I wish you had your location shown on your bio. Just curious where there is a dealer that is THAT clueless.

I just updated my bio, from west Ky.

 

[Garyr32034]

View attachment 421104

Here's one with #50....

I’m looking for the square spacer at the top of the boom BH77 kubota
(there is a gap and play in the boom) sliding side to side the pin is good but I can’t find those square spacers on a diagram ?
any advice thank you
g

 

[rScotty]

What model backhoe? Have you looked at the diagrams at Messicks.com? If it's an original part it will be on the diagram.

 

[Garyr32034]

What model backhoe? Have you looked at the diagrams at Messicks.com? If it's an original part it will be on the diagram.

It’s a Bh77 looked for days on messicks do not see it anywhere

 

[rScotty]

You're right. I couldn't find it on Messicks.Com either. The top of the boom doesn't show any pin or any parts at all up there. And the illustration labeled as being for the dipperstick that connects to the top of the boom is mislabeled and shows something else entirely.
Is it just a matter of measuring the gap and buying a big spacer washer?