Eric Salop
Elite Member
Showers on and off all night, heavy enough to wake us both up. Almost over now, looking forward to a couple of fine days, maybe more.
I don't think I have ever done as much swapping around on the tractor as yesterday, as I went from weights off to pull trailer, to weights on, forks on, to move pallets of stone. Then on to bale spike to load up with hay, back to forks, then ended the day with the bucket on to move stone to repair the drive. Thanks to a quick attach FEL, I even had time to take a couple of pics.

The 3-point lift arm balls on the Iseki are still very tight. A dolly has made unhitching weights so much easier.

The short lengths of oak on the top is what was left from the old barn roof. They must be well over 200 years old (after felling) and were covered in grime before I blasted off the muck with a power washer. I hate burning potentially good wood. Keep it long enough and a use always seems to be found. These offcuts had been put to one side for the last 6 years.

I don't think I have ever done as much swapping around on the tractor as yesterday, as I went from weights off to pull trailer, to weights on, forks on, to move pallets of stone. Then on to bale spike to load up with hay, back to forks, then ended the day with the bucket on to move stone to repair the drive. Thanks to a quick attach FEL, I even had time to take a couple of pics.


The 3-point lift arm balls on the Iseki are still very tight. A dolly has made unhitching weights so much easier.

The short lengths of oak on the top is what was left from the old barn roof. They must be well over 200 years old (after felling) and were covered in grime before I blasted off the muck with a power washer. I hate burning potentially good wood. Keep it long enough and a use always seems to be found. These offcuts had been put to one side for the last 6 years.

