locknut
Platinum Member
- Joined
- Jul 31, 2006
- Messages
- 533
- Tractor
- Kubota
If you're wanting 4" OD and 3.5" ID you're talking tubing,NOT PIPE.Speedymetals as the above poster suggested is where you get it.
need a small pc. of pipe
- Thread starter chuck172
- Start date
- Views: 3458
If you're wanting 4" OD and 3.5" ID you're talking tubing,NOT PIPE.Speedymetals as the above poster suggested is where you get it.
chim
Elite Member
Have a look at this link and scroll down to 3-1/2" Schedule 40 pipe. The OD is 4" and the ID is 3.521" which is only 21/1000 larger than the 3-1/2" he was looking for.
metalcaster
Silver Member
Alro.com has a very complete online store where you can buy whatever piece you need. With it being so short it can be shipped via UPS. They are my first and usually last stop when purchasing fab materials.
farm boy00
Veteran Member
- Joined
- Jul 17, 2014
- Messages
- 1,297
- Location
- Howard City, MI
- Tractor
- John Deere M&MT, Case 1030 comfort king, Sears ST16, Craftsmen 6000, homemade articulation mini-loader
Alro is a amazing place. We use them to supply all sheet metal for our custom build duct work. Amazing inside. We usually have a trailer on going to get big pallets and if there is anything on like farm machinery people always flock to look at it and go through the doors for a smoke break
Sorry to hijack
beaglebriar
Member
I may have some in my scrap bucket. If I do you're welcome to it.
Fawken
Platinum Member
Absolutely! And I said it was schedule 40 pipe 5 minutes after he posted. I've been buying and using it since the mid 80's. This bickering for the sake of bickering is getting old. Enough. TIA
Teachu2
Platinum Member
Maybe you're on his "ignore" list!
Fawken
Platinum Member
Perhaps. The place seems to have more idiots than when I first joined up which was about a year and a half before you. It was better, IMO, in those days. I read everyone's post and the entire thread before I respond to it. I think I can learn something from most anyone and usually do.
chim
Elite Member
Fawken, I did read all the posts before making post# 12 and it was not my intent to cause a stir. I'm old and have a right to be confused. It's my fault I don't pay much attention to names of posters, and didn't realize you were the same guy who already said you had pipe that size in a previous post before screaming "NOT PIPE" in another:
"If you're wanting 4" OD and 3.5" ID you're talking tubing, NOT PIPE".
"If you're wanting 4" OD and 3.5" ID you're talking tubing, NOT PIPE".
Fawken
Platinum Member
I was not talking about you, Chim. I was talking about the guy who said "NOT PIPE." I was agreeing with you. This is the problem with forums. So much is lost in the text and how it is interpreted. My point on this and a couple of other threads was this: The OP required a piece of pipe. He's already found two posters (or more) that have it. Problem solved. Now someone comes along and confuses the issue by saying it is not pipe which for future reference could cost someone some money. It is really a moot point, but I have (and I'll bet others do too) all kinds of weird steel specimens in my scrap barrel and I'd rather someone be able to use it rather than sell it for scrap.