PICTURES ONLY thread

   / PICTURES ONLY thread #301  
Poured the basement floor for my daughters house yesterday,

image.jpg
 
   / PICTURES ONLY thread #302  
Got some good tractor therapy hours yesterday and today. Mowed 30 acres of hay. 7 hours. Start baling Tuesday.
 

Attachments

  • image-2833858913.jpg
    image-2833858913.jpg
    640.3 KB · Views: 311
   / PICTURES ONLY thread #303  
Did a little finish grading on new yard. Gotta get it ready to sow in a couple months.
 

Attachments

  • image-2830319959.jpg
    image-2830319959.jpg
    554.3 KB · Views: 363
  • image-1716938678.jpg
    image-1716938678.jpg
    636 KB · Views: 359
  • image-663478046.jpg
    image-663478046.jpg
    487.4 KB · Views: 352
  • image-2999922529.jpg
    image-2999922529.jpg
    683.6 KB · Views: 424
   / PICTURES ONLY thread #304  
Used the 4046 to lift the Boomer 1020 so I could remove blades and clean the deck. Picture was taken before placing a stack of 10 inch concrete blocks under the front axle and chocking the rear.

 
   / PICTURES ONLY thread #305  
This tractor is a pleasure to own and my friend for life! Much easier to move the wagon with! We've had a lot of rain this year and I'm starting to miss my tractor! 2 years old and just turned 300 hours! Not bad for a weekend worrier!

ForumRunner_20150721_033617.png
 
   / PICTURES ONLY thread #306  
I forgot about this thread too.
Got a chance to try out my Woods BH750 today. Dug out and old tree stump and a few feet away dug up a boulder that was growing. That boulder was heavy. even with loaded tires and the BH I still felt the rear end get light. The pressure relief went off trying to lift at idle but was able to lift it by raising idle to 1600.
The stump was so rotted it disintegrated digging it up.

How long is that thumb? 36"?
 
   / PICTURES ONLY thread #309  
Okay thanks for reply, I might have to order one for use with my pallet forks.

I bought 2 base mounts when I ordered mine and put one on my bucket. I just pull 3 pins and disconnect the 2 hoses and switch the thumb to the bucket. 90% of the time it's on my forks.
 
   / PICTURES ONLY thread #310  
Okay thanks for reply, I might have to order one for use with my pallet forks.

I bought 2 base mounts when I ordered mine. Just pull 3 pins and disconnect 2 hoses and switch the thumb to the bucket. 90% of the time it stays on the forks.
 

Tractor & Equipment Auctions

2014 Gillig G27B102N4 31+56 Low Floor Passenger Bus (A50323)
2014 Gillig...
7' Bush Hog 3 pt Mower (A50515)
7' Bush Hog 3 pt...
1998 VOLVO A40 OFFROAD DUMP TRUCK (A51242)
1998 VOLVO A40...
Quick Attach Accumulator Grapple (A50514)
Quick Attach...
UNUSED FUTURE BOX OF MISC RATCHET STRAPS (A51243)
UNUSED FUTURE BOX...
RIDE AND DRIVE INFO (A50775)
RIDE AND DRIVE...
 
Top