OP
Vladimir Maksimenko
Silver Member
Thank you!
Home-made mini tractor 4*4 with the joint joined frame
- Thread starter Vladimir Maksimenko
- Start date
- Views: 65195
Thank you!
OP
Vladimir Maksimenko
Silver Member
I want to show how I made two corps plow with old and slightly different horse plows.
OP
Vladimir Maksimenko
Silver Member
OP
Vladimir Maksimenko
Silver Member
OP
Vladimir Maksimenko
Silver Member
I checked the winter, two days after the minor frosts. The ground is wet and not polished blades, which adhere to the land.
OP
Vladimir Maksimenko
Silver Member
Brushed snow on the second day of Christmas.
OP
Vladimir Maksimenko
Silver Member
Progress Report for two years
OP
Vladimir Maksimenko
Silver Member
Thank you! Yes, my comfortable seat
Camdigger
Member
Definitely one of the better tractor builds Vladimir. Congratulations.
Back home, plows have fallen out of favor because they don't perform well in rocky ground. I am no plow expert, but if your mouldboards are rusty, could you buff them with a wire wheel? I recall a neighbour back home that greased his moldboards after fall plowing to prevent the heavy clay soil from sticking. One other thing, does anyone over there use a coulter? Counters are vertical discs set up to slice the sod before the share comes along to cut the sod off, and the mouldboard turns it over.
I don't want to take anything away from a brilliant build, but I am curious....
Back home, plows have fallen out of favor because they don't perform well in rocky ground. I am no plow expert, but if your mouldboards are rusty, could you buff them with a wire wheel? I recall a neighbour back home that greased his moldboards after fall plowing to prevent the heavy clay soil from sticking. One other thing, does anyone over there use a coulter? Counters are vertical discs set up to slice the sod before the share comes along to cut the sod off, and the mouldboard turns it over.
I don't want to take anything away from a brilliant build, but I am curious....
