Mikejeakins
Gold Member
What size bar do you have on your ms660? I've been looking at a ms662 with a 25" bar.
Tractors and wood! Show your pics
- Thread starter Bota4me
- Start date
- Views: 4572695
Green Acres Homestead
Veteran Member
- Joined
- Dec 11, 2010
- Messages
- 1,162
- Tractor
- Kubota L4740 sold. As of Jan 2023 I have a new L2502.
Sad. I believe this big dump of snow ended my logging for the winter
xring100
Veteran Member
- Joined
- Dec 9, 2012
- Messages
- 1,532
- Location
- Livingston County, Michigan
- Tractor
- Kubota M8540, ZD1211 60"
QUOTE=Mikejeakins;4366508]What size bar do you have on your ms660? I've been looking at a ms662 with a 25" bar.[/QUOTE]
I would definitely recommend a MS661
I normally run at 25" bar. Since these saws have the large feeling dogs your looking like 22-23" of usable bar. The saw is very well balanced with a 25" bar. The power is fantastic even after 5 years it still makes me giggle and grin ear to ear. I've heard the new saw really rips i run RS full chisel most of the time and the saw doesn't bog out with the full bar buried in the wood apply pretty good down pressure.
I run a 36" bar for the big stuff generally run RMF semi chisel full skip chain as as this wood is often hollow and dirty. I do use RSF chain if I'm cutting wood in my wood buck.
I would definitely recommend a MS661
I normally run at 25" bar. Since these saws have the large feeling dogs your looking like 22-23" of usable bar. The saw is very well balanced with a 25" bar. The power is fantastic even after 5 years it still makes me giggle and grin ear to ear. I've heard the new saw really rips i run RS full chisel most of the time and the saw doesn't bog out with the full bar buried in the wood apply pretty good down pressure.
I run a 36" bar for the big stuff generally run RMF semi chisel full skip chain as as this wood is often hollow and dirty. I do use RSF chain if I'm cutting wood in my wood buck.
Luke'sScreenName
Elite Member
- Joined
- Mar 1, 2015
- Messages
- 3,710
- Location
- Lakes Region, NH
- Tractor
- Kubota MX4800 with BH-90X hoe; Hustler FastTrack 48; B3300SU (sold); 1969 Case 680B CK (sold)
Lucky bastard.
300UGUY
Super Member
Remember, better to be lucky than good!
TomSeller
Super Member
GreatWhitehunter
Veteran Member
With a list of $1800 for an 880 even I'd have to think real hard on that one. Especially since you've got a mint 660.
Matt
Matt
xring100
Veteran Member
- Joined
- Dec 9, 2012
- Messages
- 1,532
- Location
- Livingston County, Michigan
- Tractor
- Kubota M8540, ZD1211 60"
No I'm not complaining the 660 is a heck of a saw. I really do love it. so much so that i really have no use for more than a 12" bar on my 361. I rarely use the 361 for anything bigger than 10" any more unless I've run the 660 out of fuel and dont want to fill it up again. Then I run both saws dry and call it a day.
I really have little use for a saw that size here in Michigan. I was really just trying to gauge my wife's response
Maybe someday I'll find a used MS880 or 090 at a good price and then hang it over the fire place as a conversation piece. Saws to me are like firearms you can never have too many.
in reality I'll probably add a nice pole saw or top handle arborist saw before an 880
I really have little use for a saw that size here in Michigan. I was really just trying to gauge my wife's response
Maybe someday I'll find a used MS880 or 090 at a good price and then hang it over the fire place as a conversation piece. Saws to me are like firearms you can never have too many.
in reality I'll probably add a nice pole saw or top handle arborist saw before an 880
terryknight
Veteran Member
skip the pole saw and get the top handle. they really are nice
Gordon Gould
Super Member
- Joined
- Apr 1, 2007
- Messages
- 6,660
- Location
- NorthEastern, VT
- Tractor
- Kubota L3010DT, Kubota M5640SUD, Dresser TD7G Dozer
We got an inch. Have about 3 or 4 on the ground.
What part of Nova Scotia are you in ga ?? My mothers great grand father was a boat builder in Lunenburg long ago.
gg
