NH/MA G154 G174 tx1300 TX1500 TX2140 TX2140

MyG154 · Jul 14, 2012

Ask for the info Mitch. I noticed in the photos that the tractor had a finish mower on it when you bought it. Do you still run it? I'm looking for one now so I can mow my fields in Maine.

NHmitch · Jul 14, 2012

Glad to help! The finish mower did not come with the tractor, even though it had been paired with it for the life of the tractor. I was not very happy with the dealership. They wanted to squeeze every penny out of me, and while, I did not pay a huge amount for the tractor, they refused to budge one cent, and would not throw in a $25 draw bar, because it was missing the draw bar. I want to find one too that will work, but I think that I am going to look for a brush hog, because my ag tires tear up my lawn to bad. I have been using the PTO for the post hole digger, and it works great! I am always surprised at the power this little tractor has, and now I know why so many farms in Europe, and Asia use these as their sole tractors on their farms. I wish that Iseki had continued in the US, but I know the the Challenger Brand of compact tractors, and Massey tractors are also Iseki, or at least components of them. You should have no issues at all with a finish mower. I think that the original one was a 4ft, but I am not entirely sure.

flyer61 · Jul 28, 2012

Hi Dave,

Sorry so long in getting a reply to you. Summer and all!! The tractor I have is a Bolens rebrand. On the data plate (from Iseki) it has TX2140T. Bolens rebranded it as a TX1502. It is a Manual gear with a K3A. I haven't verified by serial number but I'm 99% certain it's 91. I bought it about a year ago with 640 hours. Had to rebuild the Hydraulics cylinders on the FEL as they were leaking oil under pressure at an alarming rate. I thing someone down the line over loaded them big time!! Every thing works good now!

Kevin

QUOTE=Dave Colantuoni;2887164]Kevin
I notice in other listing you refered to your tractor
as Iseki TX2140 with Mitsubishi K3A engine.

Do you have a true Iseki 2140 or a re-branded Bolens?
Do you know what year you tractor was produced?

Mine (Iseki Tx2140F) also has the K3A engine
I'm under the belief the K3A/B engines were late 80s early 90s.
and were never used in a Bolens re-brand Gear transmision tractor.
But might have been used Bolens Hydrolic transmission.

Dave[/QUOTE]

flyer61 · Jul 28, 2012

Hi G154,

Wheres Bolton? Are you still looking for a finish mower for your 154? I have a rebuilt 42" from Woods that I'm loooking to swap for a bush hog! New blades and paint, even a new belt waiting to put on.

Kevin

MyG154 · Jul 30, 2012

flyer61 said:
Hi G154,

Wheres Bolton? Are you still looking for a finish mower for your 154? I have a rebuilt 42" from Woods that I'm loooking to swap for a bush hog! New blades and paint, even a new belt waiting to put on.

Kevin

Central Massachusetts... Yes I am looking still... Where are you located?

flyer61 · Jul 30, 2012

Winterport is just down river of Bangor. Probably about a 4 hour drive to Central Mass. is my best guess. The finish mower is a Woods YM-42 I've never used it after I rebuilt it! I'll try to get a couple pics to post. It came with the tractor when i bought it. I have a zero turn for mowing so I dont really need this mower. Looking to swap for a bush hog instead.

Kevin

MyG154 · Jul 31, 2012

flyer61 said:
Winterport is just down river of Bangor. Probably about a 4 hour drive to Central Mass. is my best guess. The finish mower is a Woods YM-42 I've never used it after I rebuilt it! I'll try to get a couple pics to post. It came with the tractor when i bought it. I have a zero turn for mowing so I dont really need this mower. Looking to swap for a bush hog instead.

Kevin

Hey Kevin, I know exactly where that is. I've got a camp on 100 acres near Kingfield. We go up that way several times a year. Unfortunately I don't have a bush hog to trade. Love to see pictures though. If you've got a price in mind let me know. - mark

Marcle · Sep 12, 2016

I'm slowly getting around to registering my Iseki TX2140 for road legal use, so the Driving Licensing Authority are going to want numbers to create a registration document. I have found the frame/chassis number on the silver label by the gear stick (shifter), so to avoid taking all the guards off, where will I find the engine serial number please?

Thanks in advance.

BTW its the 3 cylinder diesel engine if that matters.

Dave Colantuoni · Sep 12, 2016

Marcle said:
I'm slowly getting around to registering my Iseki TX2140 for road legal use, so the Driving Licensing Authority are going to want numbers to create a registration document. I have found the frame/chassis number on the silver label by the gear stick (shifter), so to avoid taking all the guards off, where will I find the engine serial number please?

Thanks in advance.

BTW its the 3 cylinder diesel engine if that matters.

Been a Long time ......
As far as I remember,
thats the tag with the serial number on it.
(see attachment)
You don't need engine number.
I'll look at mine when I get home.

BTW:
Been thur this a lot (my son is flipping cars).
Everything got reall strick in 2015.
Without an old reg and/or Title
your gona need a NH VIN verification.
Best to print it out, fill it, get it signed and have it in hand.
They also require a Bill of Sale.

If you make your own tractor/hotrod AKA: no bill of sale
they want receipts for major parts.

https://www.nh.gov/safety/divisions/dmv/forms/documents/tdmv19a.pdf

Any Police offices or inspection station can sign it.

Ops Forgot
Your in UK,
New Hampshire US info usless.

Dave

Marcle · Sep 26, 2016

Dave Colantuoni said:
Been a Long time ......
As far as I remember,
thats the tag with the serial number on it.
(see attachment)
You don't need engine number.
I'll look at mine when I get home.

View attachment 480556

BTW:
Been thur this a lot (my son is flipping cars).
Everything got reall strick in 2015.
Without an old reg and/or Title
your gona need a NH VIN verification.
Best to print it out, fill it, get it signed and have it in hand.
They also require a Bill of Sale.

If you make your own tractor/hotrod AKA: no bill of sale
they want receipts for major parts.

https://www.nh.gov/safety/divisions/dmv/forms/documents/tdmv19a.pdf

Any Police offices or inspection station can sign it.

Ops Forgot
Your in UK,
New Hampshire US info usless.

Dave

Hi Dave,

The legilation is a bit different here in the UK, but your info is still helpful.

As far as I know the engine serial number is stamped on the block top left hand side of the injector pump, but not had time to verify the info.

Thanks

Steve