jack707
Veteran Member
I have a house trailer on my land that's a eye sore so I want to take it apart but don't know where to start so I need advice.
Trailer demo
- Thread starter jack707
- Start date
- Views: 5890
dieselcrawler
Elite Member
Not a fun job, but its just disassembling things. Crow bars, hammers, sawzall, etc. Buddys and beer help.
Its like the saying goes... "How do you eat an elephant? One bite at a time!"
Its like the saying goes... "How do you eat an elephant? One bite at a time!"
CADplans
Elite Member
A 1976 Nova,,, and a ramp will help,,, if YouTube knows anything,,,,
:laughing:
:laughing:
OP
jack707
Veteran Member
Do you think it will be easer to cut the walls and then push in with the tractor? The only problem there a small room that's downstairs all cemented to the trailer.
dieselcrawler
Elite Member
The Nova idea would top the list as most fun... Combine with buddys and beer... 'Hey y'all watch this!'
I guess it depends on your desire to salvage material. The one we took apart, we wanted to separate aluminum siding (recycled/sold), wood/burnables, steel beams, and true trash. We also didnt have equipment avalible, all was done with hand tools and muscles.
I guess it depends on your desire to salvage material. The one we took apart, we wanted to separate aluminum siding (recycled/sold), wood/burnables, steel beams, and true trash. We also didnt have equipment avalible, all was done with hand tools and muscles.
OP
jack707
Veteran Member
Diesel and used motor oil would be fun but it's in the woods and the Wis.dnr would not like that. I just want the frame all wood will be burned next summer.
Cord
Veteran Member
Drive it to the local dump and have them strip it off the frame. Put the frame on CL for $500 and you got rid of it for free.
If you want to do this your self, then just go at with a tractor. There isn't much for strength in them. If you have too small of a machine, cut a hole in one corner, feed a chain down the center and hook it on the frame. With the other end attached to the tractor (or truck), you should be able to open the wall up like a zipper.
If you want to do this your self, then just go at with a tractor. There isn't much for strength in them. If you have too small of a machine, cut a hole in one corner, feed a chain down the center and hook it on the frame. With the other end attached to the tractor (or truck), you should be able to open the wall up like a zipper.
bigtiller
Super Member
- Joined
- Feb 1, 2006
- Messages
- 6,511
- Location
- central Iowa
- Tractor
- John Deere 2720 John Deere 3039R John Deere Z545R
Jack, to bad you and quicksandfarmer can't get together.
http://www.tractorbynet.com/forums/projects/371846-building-knock-down-shelter.html
http://www.tractorbynet.com/forums/projects/371846-building-knock-down-shelter.html
EverythingAttachments
Elite Member
ovrszd
Epic Contributor
- Joined
- May 27, 2006
- Messages
- 32,246
- Location
- Missouri
- Tractor
- Kubota M9540, Ford 3910FWD, Ford 555A, JD2210
Regardless how you do it, you are gonna have a mess. Best way to control that mess is as Greg said, by hand, piece at a time.
Attack it with a tractor and you'll be lucky to finish without a flat tire and you'll have debris everywhere.
Post pics, we like to watch destruction!!!!
Attack it with a tractor and you'll be lucky to finish without a flat tire and you'll have debris everywhere.
Post pics, we like to watch destruction!!!!
