Looking for measurements from a DL100 loader off a gc1700 series

[Hiawassee Longhorn]

Ok well let me think about this a little I found a guy who makes and installs loaders so I am considering going that direction they are only $1900 since I'm trying to adapt this massey loader to an older Kubota.

 

[Hiawassee Longhorn]

Looks like shipping a bucket to WA from ME is out of the question, $250.00 in shipping strapped to a pallet depot pickup.

Hi I think I want to go ahead and do this how do you want me to send you the payment?

Dylan

 

[atsah]

Let me call Yellow freight in the morning and verify the shipping cost, then we can work out the details.

 

[Hiawassee Longhorn]

Let me call Yellow freight in the morning and verify the shipping cost, then we can work out the details.

Great thank you.

 

[atsah]

Okay I did the research today. I will install the "like new" Piranha tooth bar, strap the bucket to a pallet, load it and take it to the YRC depot and ship it for $500.00. If that is what you want me to do, I will need a money order in the amount of $500.00 sent to me before I ship it.

The bucket has about 50 hours of use, the cutting edge is in great condition, there are no dents or anything of the sort, there are two chain hooks welded to each end of the bucket.

I have included pictures of it before I installed my SSQA and new bucket.

If you want to move forward and buy the bucket, let me know and I will PM you my phone number and we can talk further. Just to let you know, the tooth bar alone costs $250.00 and the bucket has to be worth $400.00 so it's a good deal for someone that needs one.

Thanks
Mark

 

[Hiawassee Longhorn]

Let me call Yellow freight in the morning and verify the shipping cost, then we can work out the details.

Sounds Great thank you.
Shoot me your phone number.

Thanks again.

Dylan

Okay I did the research today. I will install the "like new" Piranha tooth bar, strap the bucket to a pallet, load it and take it to the YRC depot and ship it for $500.00. If that is what you want me to do, I will need a money order in the amount of $500.00 sent to me before I ship it.

The bucket has about 50 hours of use, the cutting edge is in great condition, there are no dents or anything of the sort, there are two chain hooks welded to each end of the bucket.

I have included pictures of it before I installed my SSQA and new bucket.

If you want to move forward and buy the bucket, let me know and I will PM you my phone number and we can talk further. Just to let you know, the tooth bar alone costs $250.00 and the bucket has to be worth $400.00 so it's a good deal for someone that needs one.

Thanks
Mark

 

[atsah]

PM sent..

 

[atsah]

Nice talking to you Dylan, I'll get to work on getting it ready for shipment.

 

[atsah]

Dropped the bucket off this morning at YRC freight, they will call you when it gets to Seattle. Good luck with your loader build and nice talking to you Dylan.