OP
BobLong855
New member
Reversing hose on each function, only reverses the function on my selector control and reverses the lock up . Appear to be connected, I've pecked on them, could the the QD fail?
John Deere 855 Loader problem
- Thread starter BobLong855
- Start date
- Views: 9880
-
- Tags
- john deere 855
beenthere
Super Star Member
- Joined
- Aug 16, 2001
- Messages
- 18,510
- Location
- Southern Wisconsin, USA
- Tractor
- JD_4x2_Gator, JD_4300, JD_425, JD_455 AWS, added JD_455, JD_110, JD_X485(sold)
Give us a double check on the male ends that they are all four the same part. Just so we can get past that question. tks
Rock knocker
Veteran Member
My 950 had a Japanese standard on one half, and if I remember, the after market valve had an SAE standard on the other half. If you tried, you could make them connect. But it seems like this could cause an issue.
I can't remember more, this was in 1991
I can't remember more, this was in 1991
OP
BobLong855
New member
Same fittings that was on it when I got it for about 5 years now, they appear to be exactly the same. I am going to get a couple today and try them to see it it helps.
OP
BobLong855
New member
I was in Harlan today at Meade JD getting oil and filters for my Dad's 4100 JD, talked with the technician about my problem. He felt 99+ percent it is in the QD's, so I have ordered a pair, both ends. They are supposed to be in Thursday, hopefully this solves it, I will keep you posted. Thanks.
OP
BobLong855
New member
Parts came in but wrong male ends, reordered.
beenthere
Super Star Member
- Joined
- Aug 16, 2001
- Messages
- 18,510
- Location
- Southern Wisconsin, USA
- Tractor
- JD_4x2_Gator, JD_4300, JD_425, JD_455 AWS, added JD_455, JD_110, JD_X485(sold)
Is this a Deere tech you talked to, or... ?? don't understand getting wrong male ends.. what part numbers were ordered and what no.s delivered?
Just curious...
DLTTrekkers
Veteran Member
QD must have the same insides....pin to pin ....or ball to ball
OP
BobLong855
New member
"SUCCESS" after 3 trips to get the right male ends, [parts guy ordered the wrong ends] weather delays and work delays finally got to put the new QD on my 855. Worked good, got to dig out some dirt yesterday for a new tomato bed. Thank you to everyone who replied and offered assistance. Sure do love working on my tractor.
DLTTrekkers
Veteran Member
What was wrong ?
