LincolnShieldArc
New member
A Miller Bobcat is about the same money and will do everything better.
Gas powered portable welder, any thoughts on this one.
- Thread starter txlawdog
- Start date
- Views: 6515
A Miller Bobcat is about the same money and will do everything better.
Big Barn
Super Member
- Joined
- Aug 20, 2013
- Messages
- 6,874
- Location
- Victoria, B C
- Tractor
- More than 40 over the years. Ten at any one time. Mostly Ford and New Holland
Except for the compressed air.
George2615
Super Member
I'll second the Miller Bobcat. I have one. Mine's a model 250NT. 10,000 watts, 20HP. I bought it factory reconditioned from a dealer. Only had 19 hours when I got it. I bolted it to a second shipping pallet with 8" wheels for ease of moving around. I have other welders in the garage so main use of the NT is for backup house power. It will run the whole house including A/C.
Attachments
Big Barn
Super Member
- Joined
- Aug 20, 2013
- Messages
- 6,874
- Location
- Victoria, B C
- Tractor
- More than 40 over the years. Ten at any one time. Mostly Ford and New Holland
Lincoln 305G's are nice also.
Mine usually just sits in the garage for backup power.
Terry
Mine usually just sits in the garage for backup power.
Terry
gsganzer
Elite Member
- Joined
- Jun 11, 2003
- Messages
- 3,210
- Location
- Denton, TX
- Tractor
- L3800 w/FEL and BH77, BX 2200 w/FEL and MMM
I love my 305G. Thanks to Terry's photo's, I spent today welding up a skid/pallet similar to his. I do have to send mine in next week to repair an oil leak on the Kohler engine, but that's no fault of Lincoln. It's a really easy welder to use and runs a great arc.
dragoneggs
Super Star Member
- Joined
- Jun 9, 2013
- Messages
- 13,627
- Location
- Seabeck, Washington
- Tractor
- Kubota BX-25D, Kubota Z122RKW-42
Yeah that was beautiful wasn't it? Nice Terry! Is it still that clean?
Big Barn
Super Member
- Joined
- Aug 20, 2013
- Messages
- 6,874
- Location
- Victoria, B C
- Tractor
- More than 40 over the years. Ten at any one time. Mostly Ford and New Holland
Yeah that was beautiful wasn't it? Nice Terry! Is it still that clean?
The garage photo was just taken, Mark.
LincolnShieldArc
New member
I've had 3 trailblazers and not happy with any, so the next year I bought a Ranger 305G and couldn't believe how much better it welded for me.
Budweiser John
Platinum Member
I've got an older Lincoln 225 Weldnpower.
AC/DC up to 225 amps, 110/220 volt power outlets. Built and fixed a lot of stuff with that machine.
Not sure what the duty cycle is as I wear out before the machine does.
B John
AC/DC up to 225 amps, 110/220 volt power outlets. Built and fixed a lot of stuff with that machine.
Not sure what the duty cycle is as I wear out before the machine does.
B John
