dodge man
Super Star Member
They look really nice but to be honest, its more than we usually spend. We usually get a smaller place than you have. I might have to think about it if we want to splurge some time, because the location is great.
Buying Advice New 40 hp tractor... the search begins.
- Thread starter Ljh815
- Start date
- Views: 16392
They look really nice but to be honest, its more than we usually spend. We usually get a smaller place than you have. I might have to think about it if we want to splurge some time, because the location is great.
BrokeFarmerJohn
Veteran Member
- Joined
- Oct 7, 2016
- Messages
- 2,233
- Location
- Columbus Ohio
- Tractor
- 2017 Mahindra 5555, John Blue G-1000, Massey Ferguson 98, John Deere GP
I have a 05 HST 4320, its turbo 4 cylinder with 48hp, similar to the 4052R.
I really like this machine, it does a very good job with everything I have asked of it, mainly FEL work. Mine has 835 hours on it.
One thing to keep in mind with a turboed tractor, if the exhaust faces forward like mine, the wind of transit can make the turbo spin backwards, it's not good on the turbos, if you buy the 4052R, cover the exhaust in transit.
The auto leveling heavier loader would be really nice. In your position, I wouldn't regret buying the 4052R. Although more HP would be nice to run a batwing or bigger rear PTO powered implements.
I really like this machine, it does a very good job with everything I have asked of it, mainly FEL work. Mine has 835 hours on it.
One thing to keep in mind with a turboed tractor, if the exhaust faces forward like mine, the wind of transit can make the turbo spin backwards, it's not good on the turbos, if you buy the 4052R, cover the exhaust in transit.
The auto leveling heavier loader would be really nice. In your position, I wouldn't regret buying the 4052R. Although more HP would be nice to run a batwing or bigger rear PTO powered implements.
Slowpoke Slim
Elite Member
- Joined
- Jan 6, 2017
- Messages
- 3,627
- Location
- Bismarck, ND
- Tractor
- Husqvarna YTH24V48 riding mower, Branson 3725CH
I don't know if you've seen this:
http://www.tractorbynet.com/forums/owning-operating/347501-john-deere-4066r-hydraulic-issue.html
The original post is a couple years old, but looks like it's still a problem on the R's. I'd check out that FEL very carefully.
http://www.tractorbynet.com/forums/owning-operating/347501-john-deere-4066r-hydraulic-issue.html
The original post is a couple years old, but looks like it's still a problem on the R's. I'd check out that FEL very carefully.
