Satoh rototiller 2PR 1100s

[cp7]

I've found a Satoh rototiller that I want to sell and wanted to let you guys know.

I've never put power to it but it spins free by hand and is nice and quiet.

It's located in Kansas City Mo. but I'm also willing to ship it.

 

[shinnery41]

Looks like that would be an interesting job to adapt that to a Cat. 0 hitch. Do you have the complete driveshaft and what does it have on the other end 540PTO? How much are you asking for it?
Bryce

 

[Ilikeurtractor]

Which direction PTO does the tiller take? Some (maybe all of this model?) used counter-clockwise PTO inputs.

 

[cp7]

Sorry I should have said I'm asking $600 for it.
I've pictured what I have and I believe that's all that necessary to run it on the Satoh tractor.

 

[Sonny580]

Do you have the front half of the pto shaft??? thanks; sonny580

 

[mntrails]

Here's a picture of a couple of the additional parts needed to use that tiller on a Mitsubishi/Satoh tractor. Pictured are the front half of the drive shaft. This mates with the square shaft on the tiller and the other end goes on the native spline of the PTO (not out of a reverser box - the reverser box needs to be removed to use the tiller). The second piece is a the large blue bracket that accepts the round pins pictured on the front of the tiller. There are also some special spacers and pins to fix the tiller to the bracket that I don't have pictures of. Hope this helps explain whats needed!

 

[lens12]

This tiller was built for the S370. It is a reverse rotation from the standard pto, has 18 spline pto, & uses a 2 point hook up.

 

[Ari Dee]

I've found a Satoh rototiller that I want to sell and wanted to let you guys know.

I've never put power to it but it spins free by hand and is nice and quiet.

It's located in Kansas City Mo. but I'm also willing to ship it.

I have a friend who is interested to buy it. Please provide your contact phone number so he can talk to you about it. Thanks.

 

[JustinsBeaver]

I found this 2PR 1100s over the weekend for my S370D. I am looking for the 2 point hook up bracket... Or at least a decent diagram to build one. Any ideas?
Thank you

 

[lens12]

I think I have an extra bracket.