Loss of power, fuel starvation, I think

   / Loss of power, fuel starvation, I think #21  
After experiencing some moisture in my fuel I am now (after running across some boaters talking about how they deal with this) cycling fuel through the storage tank/tank filters before dispensing into any of my vehicles/tractors. I have a water filter and a particulate filter, but if something is post these filters (condensation or bugs in the hose) you will be pushing it straight into your vehicle's tank.

For the first time ever, with my nearly brand new NX, I was subjected to what happens when you have freezing weather and moisture in the tractor's fuel tank! I was getting ice formation blocking the flow from the tank: blowing back through the line from the tractor's fuel filter and feeling the change in pressure (as the ice pellet got dislodged) confirmed this.
 
   / Loss of power, fuel starvation, I think #22  
...I am now (after running across some boaters talking about how they deal with this) cycling fuel through the storage tank/tank filters before dispensing into any of my vehicles/tractors. ...

This is a big deal for big cruising boats. Some of these hold thousands of gallons of Diesel and you don't just throw out that kind of investment for condensate or Diesel "bugs".. So there are services that "polish" the fuel already in the tanks by pumping it through a dockside filter bank.
 
Last edited:
   / Loss of power, fuel starvation, I think #23  
Scott, yes. For me it was a forum for smaller boats that's I'd run across this discussion, but the procedure was essentially the same- "polishing." As was stated, this is what filters are for! :D

When I'd looked at my system as to how it would be forming condensation I stopped and thought that the hose itself would be doing it and that any moisture that it would collect wouldn't be dealt with by the filters. So, simple enough, just pump the hose back into the tank before pushing any fuel into the vehicle. Only my NX has CR, which is a lot more sensitive to moisture in the fuel: no moisture sensors in anything other than my old IDI Ford (which sits for months on end- never has triggered the sensor).
 

Tractor & Equipment Auctions

2018 CHEVROLET 2500 SILVERADO (A52472)
2018 CHEVROLET...
2012 FORD F-550 SUPER DUTY XLT SERVICE TRUCK (A51406)
2012 FORD F-550...
Ford Super Duty Pickup Truck Bed (A51691)
Ford Super Duty...
2019 Doosan LCV6W Towable LED Light Tower (A51691)
2019 Doosan LCV6W...
2007 International 7600 Tandem Truck, VIN # 1HSWYAHR37J478209 (A51572)
2007 International...
Grove 4x4 Rough Terrain Hydraulic Crane (A51691)
Grove 4x4 Rough...
 
Top