Farmerboy
Bronze Member
After not a lot of looking, we pulled the trigger on a new 4500P with the "Tuff Cut" deck. I think I'm going to have to arm wrestle the wife in order to get some seat time...
4500P - New Machine Coming Next Week
- Thread starter Farmerboy
- Start date
- Views: 8525
cstamm81
Gold Member
- Joined
- Aug 10, 2009
- Messages
- 360
- Location
- Leesport, PA
- Tractor
- Kubota L5740, Mahindra 3016HST, Kubota F2880
Congratulations. What engine did you get? Does it have 3 to? Mind if I asked what you paid? I'm in the market, debating between uses and new...
johara1
Platinum Member
the 4500P is the FI. Kawasaki two cyl....... Jim
OP
Farmerboy
Bronze Member
The out-the-door price for a 4500P, Tuff Cut Deck, Front Casters, optional foot pedal, and optional arm rests was right at $26,000.
I did pursue competitive quotes from three dealers. The others were at $30,000 and $28,500 for the exact same machine.
I did pursue competitive quotes from three dealers. The others were at $30,000 and $28,500 for the exact same machine.
johara1
Platinum Member
That is scary, I remember a 2020 JD. tractor with a 3 bottom mounted plow was 5200.oo....... Jim
OP
Farmerboy
Bronze Member
The only real complaint I've had about this process, is that this machine costs more than the last 2 vehicles I bought.
However, considering I've rolled a tractor over in the past (and got pinned under it), and no longer have to mow my hills with a 300 pound walk-behind (man killer) brush hog, it's worth every dime.
However, considering I've rolled a tractor over in the past (and got pinned under it), and no longer have to mow my hills with a 300 pound walk-behind (man killer) brush hog, it's worth every dime.
johara1
Platinum Member
murph1
Gold Member
Get your Mrs. a power bucket for moving mulch, she will love it!
OP
Farmerboy
Bronze Member
Once I find 5 minutes, I'm going to post an initial review of the new machine. 20 hours seat time in 3 days...
In the meantime, we bought a 72" finish mower as well.
Biggest obstacle: the hydraulics have a fairly significant leak that I'm trying to troubleshoot. Unfortunately, it came directly from Ventrac like that....
