new deck

   / new deck
  • Thread Starter
#11  
It seems to be a problem getting the tilt cylinder and hoses, this dealer has a bunch of new decks out there without the tilt cyl. I did find the new deck tilts easier the way it's made over the old deck. The cut is so much better than the old deck but it is sure heavy........ Jim
 
   / new deck #12  
It seems to be a problem getting the tilt cylinder and hoses, this dealer has a bunch of new decks out there without the tilt cyl. I did find the new deck tilts easier the way it's made over the old deck. The cut is so much better than the old deck but it is sure heavy........ Jim

It is built much better. I just love the power tilt and the offset front wheels
 
   / new deck #13  
Might try Mast Lepley in Ohio. Dave Steiner.
 
   / new deck
  • Thread Starter
#14  
Might try Mast Lepley in Ohio. Dave Steiner.



Why, Don't all dealers get parts the same place? Doesn't make sense to buy the deck one place and get a cylinder from an other dealer.... If this is the case something smells...... Jim
 
   / new deck #15  
Why, Don't all dealers get parts the same place? Doesn't make sense to buy the deck one place and get a cylinder from an other dealer.... If this is the case something smells...... Jim

Mast Lepley is the biggest dealer anywhere for Ventrac and are less than 10 miles from the Ventrac plant. I offered help and you now call fraud? Oh well
 
   / new deck
  • Thread Starter
#16  
Mast Lepley is the biggest dealer anywhere for Ventrac and are less than 10 miles from the Ventrac plant. I offered help and you now call fraud? Oh well



Nothing about Fraud, but why would they have a cylinder and nobody else does? Why would Ventrac have new decks out there and no tilt cylinders We are not 3hrs. from the plant but the plant doesn't have them and has not had them for months. Ten miles close to nothing is still nothing........ Jim
 
   / new deck #17  
Nothing about Fraud, but why would they have a cylinder and nobody else does? Why would Ventrac have new decks out there and no tilt cylinders We are not 3hrs. from the plant but the plant doesn't have them and has not had them for months. Ten miles close to nothing is still nothing........ Jim

Yea? Explain me Mast got a order in for 35 tilt set-ups then. Now 72" decks are getting scarce.
 
   / new deck
  • Thread Starter
#18  
Yea? Explain me Mast got a order in for 35 tilt set-ups then. Now 72" decks are getting scarce.


OK, then why in the world would you tell me to try out there when you already knew they didn't have them?......jim
 
   / new deck #19  
OK, then why in the world would you tell me to try out there when you already knew they didn't have them?......jim

They have tilt setups. DUN
 

Tractor & Equipment Auctions

2015 CIMC 40FT CONTAINER CHASSIS (A52141)
2015 CIMC 40FT...
2025 78in Rock Bucket Skid Steer Attachment (A50322)
2025 78in Rock...
2012 SULLIVAN PALATEK AIR COMPRESSOR (A51222)
2012 SULLIVAN...
2022 Ram Bighorn 2500 4X4 (A52128)
2022 Ram Bighorn...
2021 Western Star 4700SF Tri Axle Dump (A47384)
2021 Western Star...
2018 Dodge Charger Sedan (A50324)
2018 Dodge Charger...
 
Top