LouNY
Super Star Member
- Joined
- Jul 4, 2015
- Messages
- 12,427
- Location
- Greenwich, NY
- Tractor
- Branson 8050, IH 574, Oliver 1550 Diesel Utility (traded in on Branson) NH 8160. Kioti CK2620SECH
As the last guy said hst is no good, weak and expensive to fix as they break all the time.
That's why commercial skid steers, dozers and excavators use them, so there can be a lot of expensive down time for the businesses that own them.
That was sarcasm.
This is not sarcasm.
I don't believe anywhere in my post I say no good or that they break all the time.
Expensive to fix heck yes, they are.
What goes out on skid steers when they get a few thousand hours, the drives.
What goes out on excavators the turn table motors and final drives.
Do either of those do any drawbar work????
As far as dozers, the last I knew there where a few hydrostatic drives but the vast majority where power shifts, which is a whole different critter.
I actually like hydro's for light work and loader work.
I don't like the foot pedal controls, go back to fender or console mounted sticks with a foot an inch pedal and they are handy, but not for
mainly drawbar work continuously pulling hard.
Lou