Pete6114
Gold Member
- Joined
- Dec 8, 2000
- Messages
- 383
- Location
- SW Ontario, Canada
- Tractor
- F2690(Sold) GR2120(Sold) L3240(sold) B1700(sold)
What's this?
- Thread starter Pete6114
- Start date
- Views: 2470
boomer1025
Platinum Member
Looks like a lock bolt to keep the wheel from spinning around in a circle
IvanS
Silver Member
It's a bolt that holds the detent spring in place that encourages the wheel to remain in the straight position and not wobble like it would tend to do otherwise. With the mower deck off the ground, pivot the wheel by hand from left to right, you'll feel the detent engage at the 12 o'clock position.
OP
Pete6114
Gold Member
- Joined
- Dec 8, 2000
- Messages
- 383
- Location
- SW Ontario, Canada
- Tractor
- F2690(Sold) GR2120(Sold) L3240(sold) B1700(sold)
Thanks guys. Now why cant Kubota print this in the manual. Or did they and i cant see it?
IvanS
Silver Member
It may not be in the manual, buts it's in the factory parts diagram the dealer has. You can register on Messicks web site and see the parts diagram there.
JOHNTHOMAS
Super Member
- Joined
- Apr 14, 2008
- Messages
- 7,719
- Location
- Somerset, Ky
- Tractor
- F2690 4WD RTV X1140 MX5400 HST ZD1211
:laughing::cool2:
corl
Silver Member
- Joined
- Mar 31, 2012
- Messages
- 216
- Location
- West Grove, Pa
- Tractor
- 2013 Kubota MX5100 HST, 1989 Kubota F2100
It is in my manual: page 19. I have a F2100 It is a set bolt and is supposed to be adjusted when the front wheel starts to shimmy. You adjust the bolt to 7 mm from the base of the prominence to the bottom of the bolt head. I have been mowing with my deck for 29 years and have yet to have to adjust it.
