kenlip
Silver Member
- Joined
- Nov 3, 2017
- Messages
- 221
- Location
- NSW Australia
- Tractor
- Kubota MX5100 with Challenge FEL and 4:1
:thumbsup:
Todays shop time.
- Thread starter 4570Man
- Start date
- Views: 265305
:thumbsup:
daugen
Epic Contributor
that sure looks nice.
Is anyone board enough to make one of these Bowling ball weld tables that can be use for I not sure what. My son sent me this youtube video of Laurel and Hardy making this weld table, if nothing else I'd say it's imagination at work.......... Can We Make a Bowling Ball Welding Table in 4 Hours? - YouTube
frugalangler
Gold Member
I must admit, it's a novel idea. I've got a clamp-on hobby vise that I use that is that same principal, I use it to work on printed circuit boards, so I can hold at any angle to de-solder a device - and for assembly also. I could also think of mounting a regular 5" bench vise, would allow the similar principal as my hobby vise but for hobbies on a much larger scale!
OP
4570Man
Super Star Member
- Joined
- Apr 7, 2015
- Messages
- 18,440
- Location
- Crossville, TN
- Tractor
- Kubota M59, Kubota L3800, Grasshopper 428D, Topkick dump truck, 3500 dump truck, 10 ton trailer, more lighter trailers.
I got my box done. I failed to realize most of my wood is cut longer than 23" so I have to stand it up.
lostcreekranch
Super Member
- Joined
- Dec 14, 2012
- Messages
- 7,948
- Location
- Austin County, Texas
- Tractor
- NH TL-100A with Bush Hog 5045 FEL, WR Long 3rd function, LS XR4155HC w/FEL, WR Long 3rd Function.
BukitCase
Elite Member
- Joined
- Feb 17, 2012
- Messages
- 2,753
- Location
- Albany OR
- Tractor
- Case 580B, Long 460, Allis-Chalmers 160
Got tired of tryin' to find/assemble a 19mm socket, hex adapter and drill when I wanted to move something a bit heavy, so I changed this 
to this
Couple minor bugs to massage, like keeping the trolley from running over the power cord
but that vise in the pics weighs about 100 pounds - moved it by hand the other day, spent the last TWO waitin' til I could take more Ibuprofen
Now, I just moved that vise from one table over to the other one and back, put it on the floor and back, and I'm still movin' :cool2: ...Steve
to this
Couple minor bugs to massage, like keeping the trolley from running over the power cord
but that vise in the pics weighs about 100 pounds - moved it by hand the other day, spent the last TWO waitin' til I could take more Ibuprofen Now, I just moved that vise from one table over to the other one and back, put it on the floor and back, and I'm still movin' :cool2: ...Steve
Attachments
Last edited:
daugen
Epic Contributor
talking about moving wood, saw something online where a guy had taken the grain elevators off two old combines, and rigged up a long conveyor from his woodpile to his house. Not sure if his wife had any say on what that looked like...
BukitCase
Elite Member
- Joined
- Feb 17, 2012
- Messages
- 2,753
- Location
- Albany OR
- Tractor
- Case 580B, Long 460, Allis-Chalmers 160
Fixed the power cord thang, couple other adjustments - looks like I wuz off on my weight estimate - only 97.5 lbs Hadn't used the small crane scale for quite a while, looks like I'm gonna hafta open it up and find out what kind of battery it takes - won't work unless it's plugged in... Steve
Hadn't used the small crane scale for quite a while, looks like I'm gonna hafta open it up and find out what kind of battery it takes - won't work unless it's plugged in... SteveAttachments
OP
4570Man
Super Star Member
- Joined
- Apr 7, 2015
- Messages
- 18,440
- Location
- Crossville, TN
- Tractor
- Kubota M59, Kubota L3800, Grasshopper 428D, Topkick dump truck, 3500 dump truck, 10 ton trailer, more lighter trailers.
talking about moving wood, saw something online where a guy had taken the grain elevators off two old combines, and rigged up a long conveyor from his woodpile to his house. Not sure if his wife had any say on what that looked like...
I've got 3 treadmills I intend on converting into a wood conveyor. Although the intended use wouldn't be moving wood into the house.