Forks Need attachment advice for moving brush piles

   / Need attachment advice for moving brush piles #11  
You don't know the right people. Fork lift places always have a supply, all different sizes. Usually a couple hundred bucks CDN. I took my first set to HORST and they made up a JD 640 carrier to accommodate them. Pretty sure, those days are long gone, but a good shop will do it.
 
   / Need attachment advice for moving brush piles #12  
Worksaver Manure fork. Raise the loader, point the tines to the ground and drive forward slowly...works awesome!
 
   / Need attachment advice for moving brush piles #13  
Is your bucket SSQA? (bucket quick attach) Can you weld? or are you looking for something to buy?
 
   / Need attachment advice for moving brush piles
  • Thread Starter
#14  
What do y’all think of titan debris forks. The 60” are $260. Seems like a good price. Only thing that concerns me is the forks are only 21” long.

6" Clamp-On Debris Forks
 
   / Need attachment advice for moving brush piles
  • Thread Starter
#15  
IMG_4481.JPGIMG_4479.JPGIMG_4482.JPG
 
   / Need attachment advice for moving brush piles #18  
Worksaver Manure fork. Raise the loader, point the tines to the ground and drive forward slowly...works awesome!

I like that you can buy Worksaver Forks with SSQA and John Deer QA to the FEL. You improve visibility of debris piles and increase payload capacity a bit by eliminating the bucket.

However, I like the design of Bucket Solutions' Ultra Forks a little better. Ultra Forks seem a little beefier (170 pounds/60" vs. 146 pounds/60") and individual tines unscrew so you can vary spacing or replace one easily. Varying the tine spacing allows carrying verdure with less dirt included.

See Post #7.

Manure Forks from Worksaver
 
Last edited:
   / Need attachment advice for moving brush piles #20  
What do you think of Titan debris forks? The 60 are $260. Seems like a good price. Only thing that concerns me is the forks are only 21 long.

The tines on my Hayne's aluminum debris forks are 19" long; five fork tines spaced over 54" width, outside to outside. I have never wanted more depth.

See Post #7.

Several respondents suggest some pallet fork tasks are best handled with two pairs of pallet forks.

I use 600 or 850 pounds of Three Point Hitch mounted counterbalance when lifting and transporting verdure with my debris forks on my L3560 with LA805 loader, about 1,700 pounds lift capacity.

Kubota B3300SU in photos.
 

Attachments

  • IMG_0314.JPG
    IMG_0314.JPG
    89 KB · Views: 171
  • IMG_0312.JPG
    IMG_0312.JPG
    76.6 KB · Views: 177
  • IMG_0317.JPG
    IMG_0317.JPG
    193.9 KB · Views: 161
Last edited:
 

Tractor & Equipment Auctions

1997 HUBBLER BROS. LOGGING TRAILER (A50854)
1997 HUBBLER BROS...
2018 KENWORTH T370 T/A DUMP TRUCK (A51406)
2018 KENWORTH T370...
2018 East Texas 20ft Utility Trailer (A49461)
2018 East Texas...
1984 AM GENERAL HMMWV HUMVEE (A51222)
1984 AM GENERAL...
2018 Nissan Sentra Sedan (A50324)
2018 Nissan Sentra...
2019 CATERPILLAR D6 LGP CRAWLER DOZER (A51242)
2019 CATERPILLAR...
 
Top