I'm hearing some expensive sounding noises coming from the rear end of my TC26DA. Its a popping sound, much like the rear differential lock makes when it doesn't fully engage and the gears jump a couple of teeth. If I hold down the rear differential lock while I am driving the noise stops so I'm guessing some sort of differential issue. Can anyone suggest a good source for repair parts for this tractor?
Where to get parts TC26DA
- Thread starter houdel
- Start date
- Views: 1609
tcreeley
Elite Member
I have good luck with Messicks online parts. They use the NH parts listing as their base/part numbers. They have good diagrams straight from NH.
New Holland (TC26DA) - 3 CYL COMPACT TRACTOR (1/ 6-12/ 8) Parts Diagrams
Thanks! Their prices don't seem too bad, esp compared to parts for my JD mower....
bspeedy
Platinum Member
- Joined
- Dec 18, 2012
- Messages
- 954
- Location
- Upstate SC
- Tractor
- Kubota L4330, Ford 1700, JD 2210, Takeuchi TB135 Excavator
Messicks is my go-to for NH, Kubota, Woods and Bush Hog parts. EXCELLENT service and good prices.
MiserableOldFart
Platinum Member
- Joined
- Jun 27, 2006
- Messages
- 545
- Location
- Delaware County Catskills NY
- Tractor
- NH Workmaster 40, Kubota GR2120
As stated before, Messicks. I doubt you'll do better elsewhere.
FYI, if you never got the warning, be extremely careful when filling the engine with oil to add it S-L-O-W-L-Y so as not to clog the oil system in a way that can damage the engine severely. When I change oil, I always make sure the engine is warm before draining and add the oil slowly while the engine is warm. I don't have the document in front of me, but adding oil to the engine too fast can cause catastrophic engine damage when you start it up.
FYI, if you never got the warning, be extremely careful when filling the engine with oil to add it S-L-O-W-L-Y so as not to clog the oil system in a way that can damage the engine severely. When I change oil, I always make sure the engine is warm before draining and add the oil slowly while the engine is warm. I don't have the document in front of me, but adding oil to the engine too fast can cause catastrophic engine damage when you start it up.
Last edited:
fried1765
Super Star Member
- Joined
- Jan 6, 2015
- Messages
- 10,159
- Tractor
- Kubota L48 TLB, Ford 1920 FEL, 8N Ford, Gravely 12 HP "Professional", 48" SCAG Liberty
Just to pile on, with the SAME advice.
Messick's....they are fantastic people to work with!
jbrumberg
Elite Member
- Joined
- Jan 22, 2006
- Messages
- 4,903
- Location
- Cummington, MA
- Tractor
- New Holland TC29DA, John Deere D130
Messick's.
MessickFarmEqu
Super Member
Well thats 5 votes for us 
Thanks so much guys. Good to hear we are doing it right.
Thanks so much guys. Good to hear we are doing it right.
I buy stuff from you guys as well even before the days of YouTube. Sometimes I get things cheaper even with the shipping costs.Well thats 5 votes for us
Thanks so much guys. Good to hear we are doing it right.
Wesley Pandey is by far the best advertising you have that's basically not costing you a dime.
I know it's not your policy to do much filming in the shop but, I think it would make for some very interesting stuff.
