Harbor Freight Tools that don't suck

   / Harbor Freight Tools that don't suck #8,651  
   / Harbor Freight Tools that don't suck #8,653  
The 4 gallon backpack sprayer is $17.99 at HF's Parking Lot Sale through March 11.

63036_zzz_500.jpg


I have one, and built an extension to the right floorboard of my little Yanmar to carry it. Pumping mounted there is a little awkward, the handle swings out away from the tractor, but it sure was convenient to drive up to a weed along the fence line (volunteer blackberry shrub or scrub oak) and douse it. TSC has a stainless wand extension that fits it. Using that I could reach anything without getting off the tractor.

Well worth $18.

Normal price is mid-20's, sale $20 occasionally. I wonder if they are closing them out to replace with something more expensive.
 
   / Harbor Freight Tools that don't suck #8,654  
I don't understand why so many here have such a problem with restrictions on the 20% off coupons.

I just enjoy busting on Harbor Freight every once in a while. I do buy from them occasionally.
 
   / Harbor Freight Tools that don't suck #8,655  
How much off???

I see, only $19.99 with coupon. How many are in stock?

The 4 gallon backpack sprayer is $17.99 at HF's Parking Lot Sale through March 11.

63036_zzz_500.jpg


I have one, and built an extension to the right floorboard of my little Yanmar to carry it. Pumping mounted there is a little awkward, the handle swings out away from the tractor, but it sure was convenient to drive up to a weed along the fence line (volunteer blackberry shrub or scrub oak) and douse it. TSC has a stainless wand extension that fits it. Using that I could reach anything without getting off the tractor.

Well worth $18.

Normal price is mid-20's, sale $20 occasionally. I wonder if they are closing them out to replace with something more expensive.
When I click the link
http://www.hfqpdb.com/coupons/501_ITC_4_GALLON_BACKPACK_SPRAYER_1520695220.9873.jpg
this shows up
hfqpdb.JPG
Well worth $18.
 
   / Harbor Freight Tools that don't suck #8,656  
Unloaded it myself yesterday. Much easier to do than I expected.

Set it near the garage with pallet forks. Lifted off the cardboard, tilted it onto the the cardboard and pulled out the pallet. Stood it back up and rolled it in.

I bought that same one a couple of years ago (on sale). It is one of my best purchases at Harbor Freight. :thumbsup:
 
   / Harbor Freight Tools that don't suck #8,657  
I snagged the 44" while it was on sale.

View attachment 543154

I've had their 44" U.S. General cabinets, both bottom and top, for around three years. Excellent.

Procrastination is often rewarded, but sometimes not. I've held off adding the 18" 7-drawer end cabinet that hangs on the side of the 44" bottom cabinet. Item 68785/62580.
image_11793.jpg

Two days ago I noticed it on the HF website for $149, the lowest price ever. BUT, all three local HFs within 30 miles are out of stock. Today I checked the HF website again and the end cabinet has disappeared. Called Customer Service and learned it's newly discontinued. :hissyfit:

I also notice that the tall 18" "side cabinet" (Item 62661/68991) that hangs on the opposite side has disappeared from the website. I guess discontinued as well.
Tall end cabinet_.jpg

Maybe a TBN'r that has either of these will post that they actually suck. Or maybe even just that the colors don't match perfectly. ;) Doubt it, but it would make me feel a bit better. :laughing:
 
   / Harbor Freight Tools that don't suck #8,658  
   / Harbor Freight Tools that don't suck #8,659  
I'd heard the 56" top chest and 44" locker were being discontinued.

Rumor is the 56" version is getting a refresh. That's part of why I decided to get the 44" now and wait and see what the new 56" looks like.

I was kind of counting on the end cabinet for the 44" being around for a while.
--
Two days ago I noticed it on the HF website for $149, the lowest price ever. BUT, all three local HFs within 30 miles are out of stock. Today I checked the HF website again and the end cabinet has disappeared. Called Customer Service and learned it's newly discontinued. :hissyfit:

I also notice that the tall 18" "side cabinet" (Item 62661/68991) that hangs on the opposite side has disappeared from the website. I guess discontinued as well.
View attachment 543507
 
   / Harbor Freight Tools that don't suck #8,660  
How many pumps are required to go from lowest to highest table position?

Probably 20-25. I’ve never counted. Is this a concern?
 

Tractor & Equipment Auctions

2016 INTERNATIONAL LF687 SLEEPER (A50046)
2016 INTERNATIONAL...
2012 JLG G5-18A TELEHANDLER (A50046)
2012 JLG G5-18A...
2017 FREIGHTLINER M2 BOX TRUCK (A50046)
2017 FREIGHTLINER...
2000 Thomas Built Saf-T-Liner MVP-ER Transit Passenger Bus (A48081)
2000 Thomas Built...
2013 VOLVO SINGLE AXLE DAY CAB (A50046)
2013 VOLVO SINGLE...
2010 Gleaner 9250 Draper Head  30' with Crary Air Wind System (A50397)
2010 Gleaner 9250...
 
Top